Has anyone bought this brand of mags. I was told by a company that they are some theof best mil spec mags on the market. Input appreciated
Same here, I got 30 or 40 from PSA last year.They are the only 'new' AR mags I buy.
Same here, I got 30 or 40 from PSA last year.
There is enough "wiggle room" to cause them to malfunction Had a couple of failure to feed using standard AR 5.56 mag. That 450 is a hoss .That 250 grain Hornaday FTX bullet leaves the barrel @ 2200fps. I want feeding it to work all the time.You would think after the 1st round on top of the follower all the others rounds would stack. I guess I'm not understanding.
It's all contingent on the mag well which is the same size on any lower, correct? Am I wrong?
That 450 is a hoss .That 250 grain Hornaday FTX bullet leaves the barrel @ 2200fps. I want feeding it to work all the time.
My Fo Fitty xperience. Tromix follower in a Lancer Battle mag works very well. Single feed follower in a D&H works very well. Tromix in a hacked up Pmag works OK.
Which part isn’t clear?English please...
Which part isn’t clear?
My Fo Fitty xperience. Tromix follower in a Lancer Battle mag works very well. Single feed follower in a D&H works very well. Tromix in a hacked up Pmag works OK.
His .450 experience:Pretty much everything but "works very well" and "works OK"
Nailed it!His .450 experience:
1. A Tromix follower in a Lancer battle mag worked very well
2. A single feed followed in a D&H mag worked very well
3. A Tromix follower in a hacked up (modified) PMag worked OK
10 seconds on google gave me this, which might help you: https://www.ammoland.com/2018/09/450-bushmaster-magazine-problems-the-tromix-solution/#axzz6EMYJo69c