BigWaylon
Head philatelist
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
HB has released their own rimfire silencer.
His announcement on ARF:
Let's see if I can answer some of the questions that will come up.
From our website.
Our Vidar 22 rimfire silencer was designed with performance, size and price in mind. A strong, DFARS certified 6Al-4V titanium tube milled from solid bar, houses the 17-4 stainless steel baffles. The titanium rear cap is threaded 1/228 with knurling and wrench flats. The titanium front cap is knurled and uses an O ring to keep it in place while allowing for easy disassembly without the need for tools.
Manufactured in USA using USA sourced DFARS Certified materials.
Pretty cool. Sounds similar to the Element 2.
Hansohn Vidar 22 Rimfire Silencer – Hansohn Brothers
hansohnbrothers.com
His announcement on ARF:
Let's see if I can answer some of the questions that will come up.
- Yes, the baffles can be cleaned using the Dip, in an ultra-sonic, tumbler, CLR, etc.
- Yes, the baffles are interlocking
- No, the baffles are not shielded, we wanted the volume
- Yes, suppression is same as the top brands and models. We wouldn't have made it if it sucked.
- No, we won't be releasing meter data. It's a rimfire, definitely hearing safe.
- No, it's not recommended for 5.7x28, get a small 5.56 silencer.
- Yes, the first round pop is low on handguns
- Warranty: workmanship and materials of course, however situations happen and we will take those on a case by case basis. Intentional damage will not be covered.
- Yes, we will continue to sell other brand rimfire models
- No, we won't try to upsell you on our rimfire models if you want something else.
From our website.
Our Vidar 22 rimfire silencer was designed with performance, size and price in mind. A strong, DFARS certified 6Al-4V titanium tube milled from solid bar, houses the 17-4 stainless steel baffles. The titanium rear cap is threaded 1/228 with knurling and wrench flats. The titanium front cap is knurled and uses an O ring to keep it in place while allowing for easy disassembly without the need for tools.
Manufactured in USA using USA sourced DFARS Certified materials.
- Caliber: All Rimfire
- Material: 6Al-4V Ti tube and end caps, 17-4 stainless steel baffles
- Length: 5.40
- Diameter: 1.0
- Weight: 4.6 oz.
- Mount: 1/2-28 direct thread
- Finish: Cobalt, Hightemp Cerakote
Pretty cool. Sounds similar to the Element 2.