Lets see your 10/22 builds/projects

View attachment 18599
Took my Open X-Ring to Pendergraft Gun Works to have him mill the rail off, drill and tap for razor red dot, mill hole on left side to move charging handle, and drilled and tapped the bolt of the left for the handle.
Joel did and outstanding job!!

That. Is. Awesome.
 
I used to have a Federal Ordnance folding stock (German MP40 style) back in the 80s on my 10/22 as seen here (one off the net)

1769524_01_1983_ruger_10_22_with_federal__640.jpg


Just saw today that MBW, a Polish company is making another version but using the folding stock and pistol grip from a AKMS. It will allow folding with the Ruger BX-25 mag inserted unlike my Fed Ord which wouldn't. Top end is a open U.

http://www.thefirearmblog.com/blog/2017/08/03/ruger-1022-folding-stock-ak47-style-mbw-stocks/

pix731121219.jpg


Still have my old 81' 10/22 unmodified except wearing a Simmons 4x scope on the Ruger mount.


CD
 
Did some change to my main limited gun last night - TacSol barrel, tall front sight, and XS rear sight. Love this thing.

zSuy3pt.jpg



I also had a pile of parts left over, so here is my mutt gun for now. Stainless barrel, black receiver, williams sights, and OD greenish mag release. I will probably shoot this with a rattle can eventually, but i'm kind of digging the mismatch stuff for now.

JeO6JUG.jpg
Don't let @Cmercaldo see that comp on that limited rifle!!!! :p
 
Oh I know. I have one on mine and you would think hes going to have a heart attack lol
I just got tired on Andrew hugging me while I shot my other gun bc the timer wouldnt pick up.

Sent from my Moto G (4) using Tapatalk
 
Here is one that I've been piecing together lately. It's not as fancy as the very nice ones that are already in this thread. It's been raining cats and dogs here today and when it stopped for a few minutes I took it out for a photo. Right before the sky opened up again, a big ol' raindrop fell on it right below the bolt.

red1022.jpg
 
Last edited:
Ruger receiver
Kidd 16.5" fluted stainless bead blasted barrel
Kidd scalloped bolt and charging handle
Kidd single stage trigger
Leupold VX2 3-9x33 EFR
DNZ low mounts
Hogue overmolded stock
She shoots under .5" all day with CCI SV, below is the best group so far but I still only have around 150 rounds through it.
VGhJePX.jpg

zmjR8py.jpg

7a8mtdp.jpg

4aJZg3M.jpg
 
Here's my budget build for rimfire 2 Gun.

20170905_183514-1.jpg

Ruger youth model, Axiom stock (so light!), Ruger BX trigger, JWH extended harging handle, Williams Firesights and a home polished bolt with a Kidd Buffer.

It runs pretty nicely and I spent less than $170 after the initial rifle purchase.
 
Here's my budget build for rimfire 2 Gun.

View attachment 22838

Ruger youth model, Axiom stock (so light!), Ruger BX trigger, JWH extended harging handle, Williams Firesights and a home polished bolt with a Kidd Buffer.

It runs pretty nicely and I spent less than $170 after the initial rifle purchase.
Looking good! I hate you didn't get to come shoot with us at DPRC. I was looking forward to meeting you.
 
Looking good! I hate you didn't get to come shoot with us at DPRC. I was looking forward to meeting you.

Yeah I was mad I was really looking forward to it. Worse yet the truck never did arrive so I didn't go for nothing.

Of course if I had shown up I'd have gotten a call soon as I started shooting.
 
Last edited:
Ruger receiver
Kidd 16.5" fluted stainless bead blasted barrel
Kidd scalloped bolt and charging handle
Kidd single stage trigger
Leupold VX2 3-9x33 EFR
DNZ low mounts
Hogue overmolded stock
She shoots under .5" all day with CCI SV, below is the best group so far but I still only have around 150 rounds through it


Very nice! I bet the squirrels are shaking in fear when that thing comes out!
 
My chicken eating critter getter. I sold off my PVS14 so I'm going to transition to my FLIR PS32 handheld for scanning and then popping on the 600lm Surefire Scout for taking the shot(s).
8yiLV0R.jpg

That factory threaded barrel/Gemtech Outback II combo will be replaced with a MIST very shortly. I'm in the final legs of approval through JK.
CHRIS
 
I need a precision 10/22 build in my life but things keep coming up and it gets put on the back burner. Don’t get me wrong, I love my bolt guns. It just feels like a void in my Rimfire repertoire.
 
This was a real budget mod... a used Butler Creek SS Folding Stock, cut in half and installed on a 10/22 Takedown with Tech Sights and a light mount. It fits in a 12" square bag with the barrel on the diagonal. My daughter took it from me!

mIWKp0x.jpg
 
Last edited:
IMG_20180308_180745.jpg IMG_20180308_180802.jpg Ruger Charger in a Nordic AR22 chassis. Shockwave tube and blade brace. Trijicon reflex 4.5MOA dual illuminated on an ARMS mount. Needs a better trigger as all of that is still stock. Just picked the Charger up yesterday. Will go Volquartsen there or just replace it with a BX which I like just fine. Have a KAK 5.56 flash can on the way to bring the muzzle device past the handguard.
 
Last edited:
View attachment 45391 View attachment 45392 Ruger Charger in a Nordic AR22 chassis. Shockwave tube and blade brace. Trijicon reflex 4.5MOA dual illuminated on an ARMS mount. Needs a better trigger as all of that is still stock. Just picked the Charger up yesterday. Will go Volquartsen there or just replace it with a BX which I like just fine. Have a KAK 5.56 flash can on the way to bring the muzzle device past the handguard.
Dadgum.
Where you gettin' all this money?
 
In all seriousness the only thing new in that photo is the Ruger Charger and the blade brace and tube. I've had that chassis and Trijicon for a few years.
 
Just a plain 10/22 threaded barrel in the Aklys Defense ZK-22 Bullpup and my Silencerco Sparrow.

IMG_20171112_195148 (Small).jpg
 
Last edited:
IMG_20180308_181033.jpg

Moved this rifle from the AR22 chassis to a plain wood stock. Added a Nikon 2-7x32. Also has a JWH Custom Bolt kit and a BX trigger.
 
My completed MIST rifle up top. I have a 6" Kidd barreled Charger on the way to me from a trade. I picked up another PMACA chassis and set it up as a pistol with a brace and folding adapter. I actually like the brace/folder setup more than the adjustable stock on the normal rifle.
t9S6zpl.jpg

8UJZg6U.jpg


I ended up finding a shorter pistol tube in my parts bin and put it on the chassis. It dropped LOP by a couple of inches over those top two pictures. This thing is going to be cool...when the Charger gets here.
EHio0p1.jpg

CHRIS
 
View attachment 45391 View attachment 45392 Ruger Charger in a Nordic AR22 chassis. Shockwave tube and blade brace. Trijicon reflex 4.5MOA dual illuminated on an ARMS mount. Needs a better trigger as all of that is still stock. Just picked the Charger up yesterday. Will go Volquartsen there or just replace it with a BX which I like just fine. Have a KAK 5.56 flash can on the way to bring the muzzle device past the handguard.

Nice looking setup.

My Copper Custom adapter for my take down Charger is ordered and I'm more than ready to get that project up and running.

<>< Fish
 
Had a old Fed Ord folding stock for my 10/22 from early 80s to 2014. Stock won't fold open with a 25 rd mag loaded however. Loved the MP40/AKMS look :)



CD

Would it work with the BX15 do you think?
 
I'd put a Williams Ace In The Hole peep on that jewel. Man what a sight radius it would have!

<>< Fish
I like the Ace in the Hole for speed shooting. Nice big fiber optic post. I have two 10/22s with those on them. I like the techs for small groups. Small precise front post.
 
Back
Top Bottom