2-stamper pic thread

TrappyBoy said:
Patiently waiting for some NODs in the new year, but this is my go-to rifle. 11.5” Sig MCX Virtus, SiCo Omega 300, Modlite OKW, and full power DBAL-A2.

View attachment 557374

View attachment 557375
Click to expand...
I'd be very curious to see how your full power DBAL compares to my full power PERST-3 under NODs at some point.



BigWaylon said:
This one has made many a grown man giggle…

S&W M&P 15-22, with the barrel cut down to 4.5”. Form 1 can fills the rail up nicely, and recently swapped to a 1.5X prism. Silencer is 1.25x6.5. Pretty much keeps bulk pack ammo subsonic, unlike my 15-22 pistol.

View attachment 557483
View attachment 557484
View attachment 557485

Best thing about it? I engraved the NFA info freehand with a Dremel. Function over form, all day long. 🤣😎

View attachment 557487

If you happen to notice any of the pink spots, that’s just some wear and tear. I bought a used factory rail to cut down when I built that F1 can, and the first one I found was the pink & black muddy girl camo…so I just sprayed it black.
Click to expand...
I did the super-quiet M&P 15-22, as well, only mine's a one-stamper (integrally suppressed ... with the barrel ported inside the suppressor prior to permanent attachment -- such that it renders all ammo subsonic that's run through it). I know EXACTLY what you mean about the sound of only the action cycling making grown men giggle. :)
 
Technically a 4-stamper I suppose.

* SWD M11/9 SMG (w/recored SWD can/titanium baffle stack) and tungsten slow bolt.

* Jersey Arms/Hatton Industries M10 SMG (Hard Times Armory can/w original shoelace eyelet filled blast chamber)

1673114380524.png
 
Last edited:
barf said:
1) How do you like that stock?
2) Do you shoot it as it’s pictured, with the stock fully collapsed?

Thinking of switching from the magpul.
Click to expand...
1)I like it. Just got it recently. so far so good.
2) I don’t shoot anything collapsed. I’m 6’4” with gorilla arms :)
 
300BLK SBR.

C4E06B65-6061-4622-A0BB-498E6EE18D7B.jpeg

This one is built using of the Spike’s lowers that caused lots of issues at the NFA Branch due to the prefix used on the serial number (not the dueling dongs).

F20E23AB-6807-40F4-B631-4C97EF299AB7.jpeg

I believe it was supposed to be Spike’s Battle Rifle. The prefix is definitely part of the SN, but it caused massive confusion with the examiners.

They did all of these things:
- approved F1s that left off the prefix
- disapproved F1s that left off the prefix
- approved F1s that included the prefix
- disapproved F1s that included the prefix
 
aOip7QP.jpg
 
TheSnail said:
LaFrance Micro UZI. 2100RPM, 10 of them on the registery. RR, not registered bolt. This actual one was used in the 1985 movie Invasion USA by Chuck Norris. I got two of them. One with a stock and suppressor (Ti-Rant9) and one without. Both are select fire open bolt guns.

View attachment 577452
Click to expand...

“Rostov…”
 
TheSnail said:
LaFrance Micro UZI. 2100RPM, 10 of them on the registery. RR, not registered bolt. This actual one was used in the 1985 movie Invasion USA by Chuck Norris. I got two of them. One with a stock and suppressor (Ti-Rant9) and one without. Both are select fire open bolt guns.

View attachment 577452
Click to expand...
Do you shoot any of these?
 
patina said:
Do you shoot any of these?
Click to expand...
Yeah, you bet. All machinguns that are not NIB, I will shoot. I recently build my apocalypses rifle which started off as a NIB M16A2 and I swapped over a bunch of LMT stuff. After being NIB for 30+years, I modified it and shot it last month. Shooting 1 round instantly depreciated its value by $10K. That's an expensive round to fire, but I accepted that because it is my apocalypses setup until death do us part. The ultimate gun I intend to roam the apacolyptic wasteland for 30yrs with. An unlimited funds, 6-figure setup. So preserving it as a collector gun was never the plan. Most of my machineguns including these micro uzi's have been shot sometime in the past 30yrs, so all bets off. I'm going to shoot and enjoy them.

I'll see if I can upload a video shooting it. Last video link I submitted of my AK machinegun, went pending Mod approval and never posted. I'll post it right after this post, and see if a mod approves if for you guys to see.
 
surrealone said:
I'd be very curious to see how your full power DBAL compares to my full power PERST-3 under NODs at some point.
Click to expand...
I had a PERST and currently have a Dbal-i2. The visible laser on the PERST is definitely brighter, but I couldn’t tell any difference with the IR.
 
Last edited:
Geissele upper/lower matched set
Criterion Core 12.5”
Geissele Super Tricon
SLR handguard
A5 buffer system
Trijicon Credo HX 1-6 & Holosun on a Badger 1.7” mount
Surefire Scout on Ariska mount

I just took pics after switching from YHM to Keymo for my new Sierra 5. 😎

IMG_1566.jpegIMG_1565.jpeg
 
Lucky63 said:
Geissele upper/lower matched set
Criterion Core 12.5”
Geissele Super Tricon
SLR handguard
A5 buffer system
Trijicon Credo HX 1-6 & Holosun on a Badger 1.7” mount
Surefire Scout on Ariska mount

I just took pics after switching from YHM to Keymo for my new Sierra 5. 😎

View attachment 680394View attachment 680395
Click to expand...

Paint looks great!
 
NKD said:
Nice gun.
I had been planning a Core 13.7" on my next upper. They aren't easy to find!
Click to expand...
They are tough to get. I got lucky a little over a year ago and picked one up from Ripcord. I’ve been waiting for their pencil barrel to come back in stock for months 🤷🏼
 
  • Like
Reactions: NKD
You must log in or register to reply here.
Back
Top Bottom