My TSG .22 upper with an element 2 on a G19 lower cycles about 80% of the time when using CCI std vel and Agrula subsonic and/or "pistol match" (which seems subsonic by the lack of a 'crack'). Sometimes I get failures to extract with the Agrula stuff, and sometimes I get failures to go into battery with all of it (rounds get wedged half way into the chamber and the bullet gets knocked a little loose in the case neck).
I've not tried it with the supersonic they recommend because that defeats the purpose of the can and would mean I couldn't shoot in the yard without annoying the neighbors.
Looks like some of the rounds seem to be hanging up in the mag, the wax on the bullet nose was dragging on the front of the mag and thought maybe that's the problem, they're not popping up into position in the mag to feed right?
Just using my finger nail I scratched the wax off 20 of each type of round and loaded them up in the mags alternating types. I had one stovepipe on round #2, but the other 39 rounds cycled perfectly. It's never run that well before.
I'll try the experiment again, but what am I risking removing that wax from the top 1/3 of the round?
I've not tried it with the supersonic they recommend because that defeats the purpose of the can and would mean I couldn't shoot in the yard without annoying the neighbors.
Looks like some of the rounds seem to be hanging up in the mag, the wax on the bullet nose was dragging on the front of the mag and thought maybe that's the problem, they're not popping up into position in the mag to feed right?
Just using my finger nail I scratched the wax off 20 of each type of round and loaded them up in the mags alternating types. I had one stovepipe on round #2, but the other 39 rounds cycled perfectly. It's never run that well before.
I'll try the experiment again, but what am I risking removing that wax from the top 1/3 of the round?