NFA pic thread

I
How do you like the Bren as an SBR? It's an appealing platform because it can be bought as a 5.56 pistol and therefore shot while waiting. Plus it's a CZ.
I'll let you know after the ZSA 2 Gun @ 37 PSR, on Friday night, will be first time shooting it aside from zeroing it. It has been mostly sitting in the safe since 10/1/16
 
This is NOT my stuff!! Just thought it was a cool pic and wanted to share. Guy posted it on ARF...and said most were SBRs. Definitely a nice collection of cans as well.

IMG_6448.JPG
 
7o9rcyl.jpg
 
Cans pictured, all are Silencerco except for the Dead Air Sandman. Also have a QC10 4.5” 9mm SBR, 3 AR lowers SBR’d - 1 currently has a 7.5” Adam’s Arms piston upper, another has a Seekins 10” 300BLK upper and the other is still a stripped lower. Finally have a PS90 with an approved Form 1 that I haven’t got around to swapping/cutting the barrel on.

All were purchased prior to getting married. Talk about putting the proverbial brakes on the stamp collection. :(
 

Attachments

  • 360A4E4F-56F1-4090-A565-7A81E84F5448.jpeg
    360A4E4F-56F1-4090-A565-7A81E84F5448.jpeg
    128 KB · Views: 17
Cans pictured, all are Silencerco except for the Dead Air Sandman. Also have a QC10 4.5” 9mm SBR, 3 AR lowers SBR’d - 1 currently has a 7.5” Adam’s Arms piston upper, another has a Seekins 10” 300BLK upper and the other is still a stripped lower. Finally have a PS90 with an approved Form 1 that I haven’t got around to swapping/cutting the barrel on.

All were purchased prior to getting married. Talk about putting the proverbial brakes on the stamp collection. :(
Any pics of the 9mm SBR?
 
Got some 1/2-28 direct thread mounts for my Rev 9 and 45. Both of these bad boys are set up for .22lr now. :)
GEvdFCm.jpg

CHRIS
Keep those baffles clean! I mounted my Rev45 on my M&P 22 for shits n giggles once... wasn't as quiet as my dedicated 22 can.

lXg3ejnh.jpg
 
Last edited:
Have you tried it with a .22 end cap on there? I usually use the Rev 9 on my CZ455 and it sounds great.

CHRIS
Have not! Hard to swallow those at $70 a pop. I really need to buy a 9mm end cap since my .45 has yet to be fired on a 45ACP but has seen 4 different 9mm hosts, ha.
 
Awesome! What are those mlok panels on the handguard? They look comfy.

They are Magpul silicon/rubber low pro “Type 1” MLOK rail covers. Wow that’s a mouthful. They’re available in a few colors.

I really like them; they don’t increase the diameter of the rail like other polymer rail panels, you can cut them to fit around accessories (lights, bipods, finger stops etc) and the silicon composition keeps a sweaty hand from slipping, provides traction if shooting from a slippery surface (metal farm gate for example), and they protect the rail itself
 
It's insane. Especially so running cci quiet in my CZ 455. Literally no audible difference between a dry fire and an actual shot.


Welcome to the club! 22's really can function like movies say "silencers" do.
 
A45F47CA-2783-4775-8250-FB3E500E1C1E.jpeg 34979E90-D84D-48AA-BD76-16E3F888E71C.jpeg A80BBDAF-A9E8-4BD7-909C-06161449027D.jpeg D3327835-6790-4B01-8439-A07D573E4498.jpeg
Building one myself right now and always looking for inspiration!

Hope these help. It’s built on a QC10 9mm Glock pattern lower, Sun Devil slick side upper, QC10 9mm BCG, Seekins rail, ADCO barrel, Magpul stock, Spike’s Tactical Enhanced LPK and an Aimpoint Carbine Optic. Silencerco Octane 9 pretty much stays on it as well. It’s engraved on the front magwell to keep the sides cleaned up.

It’s never given me any problems other than it is TIGHT. Have to really keep the BCG soaking wet in oil or it will have cycling issues. I suspect that issue will go away with more range time.
 
  • Like
Reactions: NKD
My first pistol build:
KFnuG5n.jpg


Parts:
Aero Precision M4E1 Upper/Lower/15" Quantum Keymod
Ballistic Advantage 8" .300 AAC
Aim Surplus TiN BCG
B.A.D Bolt Catch/WMD NiB Mag Catch
Taccon 3MR trigger
Gemtech 762 HVT-QD
Strike Industries Pivot/Takedown pins
Charging Handle Raptor by AXTS
Holosun 503GU Elite (green circle dot)
Cheap ass Guntec Gas Block, only running subs on this right now works.
May replace scorpion SBR as HD duty with this after it proves it is reliable etc...
 
Last edited:
Just finished SBR. Build details:

Seekins receiver set
Geisselle handguard
Lantac barrel 12.5" 556
LWRC stock with Law adapter
Geisselle SD-E
Griffin Armament M4SDK
Nightforce NX8 1-8
 

Attachments

  • IMG_20180615_101851228.jpg
    IMG_20180615_101851228.jpg
    89.6 KB · Views: 20
Back
Top Bottom