What have you recently purchased that is firearms related?

f9192ad6a7235224493ce8c5e9a9f5f9.plist
7988e00f1ca5832f5bc54a012cc0a2f0.plist


Upgraded my bolt to a Volquartsen Competition bolt on the Ruger Mark IV Target with T&J Tactical Integral Suppressor, Volquartsen trigger kit and Vortex Venom


Sent from my iPhone using Tapatalk Pro
 
Ordered all this Friday around midnight from Primary Arms, paid an extra $10 for UPS second day air. Received a shipping email Saturday mid morning, figured they just printed the shipping label.

To my surprise, my shipment was picked up by UPS Saturday afternoon and arrived today. Wow, I was impressed I received it so quickly. Especially in the current climate.

I've had all this in my cart for umpteen sales they've run. Would of could of, right...0323202201b.jpg

Time to finish out the Colt 6920 oem that's been in my safe.
 
Last edited:
Got a Q5 Match and a IDPA holster:
ffzm66V.jpg


Got a new grip for the Rhino (the stock grip was too smooth) and a IDPA holster (does IDPA still allow revolvers ?)
xS4abWj.jpg


A bunch of small parts:
I like trying different brands etc...
eLXoyDh.jpg
That Q5 sure is nice, I'd love one to add to the PPQ collection
 
That Q5 sure is nice, I'd love one to add to the PPQ collection
I shot it Sunday morning, nailed a silhouette steel target at 100 yards no problem. I was surprised that this one was just as snappy as my regular PPQ. I ordered an apex trigger/transfer bar. If you ever get out to near east @BU2scwMJL you are welcome to put it thru it's paces.
 
Last edited:
Let's see...
Foxtrot Mike 10.5 FM9 upper
Hogue grip
FM9 heavy buffer
DS Arms carbine buffer spring
POF 4.5# drop in trigger w/KNS pins
Endomags
Tailhook (Gen 2) brace
CMMG basic LPK
Wilson Combat M Lock rail covers
B.A.D lever

This is going on a standard lower and I'll be adding an Aimpoint micro in a Scalarworks mount, and old set of Troy BUIS, and a 2 point sling I had laying around.
 
Wellllll, I got a new handguard for my AR one of those extended carbine length triangular shaped aluminum handguard it only came in key loc with picatinny on top its the VKARAGE 13.5 inch handguard by BLASTAR, got it on sale for 64$ regularly its 99.99$ from CombatHunting.com, also got the magwell flare,
Am I getting tooo tacticle, do I look like a range ninga..I hope not, I try to keep my upgrades tasteful, esthetic and usable and not just a crazy looking garbage pile of tactishit..let me know what you guys think good, bad or indifferent what do you think

badda4f6c770cc8b792d500317b35d26.jpg

32c10dc80f8b9b05aa814aa825fcc59c.jpg

bce250b74ad5897a2f653314e79c8e4d.jpg



When guns become outlawed,I will become an outlaw!
The fact that the government would even consider repealing the second amendment is the very reason for which it was written.

Where did you get the plug in the handle of your Hogue grip?
 
-1000 rounds of 124 gr Blazer brass
-BCM mlok handguard
-ACT trigger
-Aero LPK, gas block, carbine buffer with spring and H buffer
-3 AR500 plates and hangers
-A Vortex monocular from another thread here
- 3 pack of Tungsten weights to fix up a couple of spare buffers for use

All were received in the last couple days!
 
Last edited:
.578-28 SiCo piston

Wasn’t enough meat on the AR-45 barrel to thread it 5/8-24 after cutting it down, so it’ll get .578-28 threads instead.
 
PWS Diablo for a new pistol build
3 milspec parts kits
2 fancier parts kits
Sig 226 tacops
 
200 rounds of 9mm while they still have some at the range, and 2 targets to try out my new gun on.

(Sure hope the range stays open....sigh....they don't even know if they'll be open tomorrow.....)
 
Apex forward set sear/trigger for M&P 2.0 9mm and trigger/transfer bar for Walther Q5 match, arriving tomorrow.
 
Ummmm...let's see.....

Sanders Armory side charging 6.5 Grendel upper
Aero M4E1 stripped lower
Geiselle SSA-E
Magpul PRS stock
LPK, MOE+ grip, rifle length buffer parts

Bought a Bushnell DMR II 3.5-21x50 with G3 reticle for my 6.5 CM bolt gun. Planning on a Bushnell LRTS 4.5-18x44 with the same G3 reticle for the Grendel.

Put a TBAC 22 Takedown in NFA jail before I left.


Ive got such a good wife. She gets all these packages in the mail, inspects for damage, sends me pics, and puts it in the safe for me. Even goes to my ffl and gets my lowers for me. All while never saying a word.

I just have to wait a long time to play with it all...including her ;)
 
It's only March. Plenty of time to remedy that little problem.;)
Nope, no $! So no buying guns.....
I really don't want a lot of guns! Hard as that may be to believe.....
 
Paid for my AR-45 barrel to get cut down and rethreaded. It was a little too narrow to get a good shoulder, so Nick @ ECCO threaded it to something else and made an extension that has a good shoulder and 5/8-24 threads.

When it gets back, I’ll spray it and the visible end of the piston a red anodized color to match the rest of the build. Not exactly sure what the barrel length is, as I was focusing more on how the silencer fit inside the rail. It’s ballpark of 5”.

03B46C50-5F64-4535-BC13-5220C5D3D725.jpeg
 
A New Old Stock Aimpoint cantilever carry handle mount, and an FDE MOLLE load bearing vest
 
Back
Top Bottom