Curious how many would be interested in a Wuhan Wand??

Djstorm100

Djstorm100

Always have a plan
Vendor
Joined
Dec 17, 2016
Messages
2,165
Location
Raleigh
Rating - 100%
5   0   0
Here is the original thread : https://www.carolinafirearmsforum.c...make-better-cheaper.59677/page-3#post-1072412


I have a small patch of parts here for our members and I've sold out in short order (Thanks for the support guys). However some have missed out and I'm doing what can to take care of them.

I gauging interest in for another run? These Wuhan Wand allow you to open doors, press debt pads, etc with out touching them with your bare hands. These are 100% copper. Price is for one is $25shipped.


Video:
65eca0324072427834046e12d3b48445.jpg


1780525a73902e210c57b6eea0c6255e.jpg
 
I’m in for the one I PM’d you about.
 
I would like one also.
 
I’d take 2.
 
You should dress one up nice with “Wuhan Wand” or whatever name and and “give” it to Clay at FG&G as a token of they community’s thanks for his business practices ... who knows what might happen if people see him with one you might be backordered for people prepping for Pandemic II
 
I'd be down for 2
 
i just use my carry pistol. seems safe as long as i keep my finger off the trigger. plus i can practice reholstering in my 20 year old crinkled up yaqui slide holster...

what about normal round doorknobs?
 
vp9c said:
i just use my carry pistol. seems safe as long as i keep my finger off the trigger. plus i can practice reholstering in my 20 year old crinkled up yaqui slide holster...

what about normal round doorknobs?
Click to expand...

Just stand there until someone else opens the door, then slide through.
 
vp9c said:
i just use my carry pistol. seems safe as long as i keep my finger off the trigger. plus i can practice reholstering in my 20 year old crinkled up yaqui slide holster...

what about normal round doorknobs?
Click to expand...

Spit on it. Then open the door.


kcult said:
Just stand there until someone else opens the door, then slide through.
Click to expand...
LOL you owe me a keyboard
 
Hey guys, those that are interested in them. I'm suspecting to have those ready by Wednesday for shipping. Please PM if you like to get on the list. I take paypal, check, money order, carrier pigeon.
 
Last edited:
Djstorm100 said:
Hey guys, those that are interested in them. I'm suspecting to have those ready by Wednesday for shipping. Please PM if you like to get on the list. I take paypal, check, money order, carrier pigeon.
Click to expand...

Bitcoin? :cool:
 
As to finish wonder which one will have the better looking copper oxide patina down the road (I think a patinated coloring gives many copper thing beautiful character). I’d almost guess your textured look will have a more uniform one without the prints from your hands in the patina but I’m just guessing.

You could spray a couple with an oxidizer (salt water maybe) and run them thru some drying cycles ... a microwave oven could be real interesting :D ...
 
Last edited:
I bought two in the first run... One for me, and one for the wife.

They are awesome! Top quality!
 
kcult said:
@Djstorm100

Could you make one with four finger holes? ;)
Click to expand...
I can make one with 10 holes. Power Punch the key pad and doors open....or people not wearing their mask correctly...or eating food with gloves on. LOL


NCFubar said:
As to finish wonder which one will have the better looking copper oxide patina down the road (I think a patinated coloring gives many copper thing beautiful character). I’d almost guess your textured look will have a more uniform one without the prints from your hands in the patina but I’m just guessing.

You could spray a couple with an oxidizer (salt water maybe) and run them thru some drying cycles ... a microwave oven could be real interesting :D ...
Click to expand...

If you leave coolant on them, they will oxidize as well. Only concern about the finish above is might make the "Wuhan Wand" not as visible, going to test that out laser. I've been hand polishing them to give a brush look (still smooth).
 
Last edited:
NCFubar said:
As to finish wonder which one will have the better looking copper oxide patina down the road (I think a patinated coloring gives many copper thing beautiful character). I’d almost guess your textured look will have a more uniform one without the prints from your hands in the patina but I’m just guessing.

You could spray a couple with an oxidizer (salt water maybe) and run them thru some drying cycles ... a microwave oven could be real interesting :D ...
Click to expand...

Something like this?
bcf25920662982e4c690b2c753429db8.jpg




Sent from my iPhone using Tapatalk
 
Yep, got in on the first run myself for a couple. Work very well, and look great.

Sent from my LM-Q710.FG using Tapatalk
 
Last edited:
I ordered 10 in the first round, been using them and they work great for doors! They do not work my iphone screen, haven’t tried an atm or gas pump yet. I was a little worried about strength, but this thing is way stronger than you’ll ever need.

Only feedback thus far is that it’s really too heavy for a keychain, at least for my keychain. Thinking about cutting one off near the finger hole and then drilling a hole vertically so it’s just the L part and the keyring becomes the handle if that makes sense.

Sorry one other bit of feedback, I think it would look better if the profile outside the fingerhole was a circle concentric with the hole. This would also shave a few grams.
 
JimB said:
I ordered 10 in the first round, been using them and they work great for doors! They do not work my iphone screen, haven’t tried an atm or gas pump yet. I was a little worried about strength, but this thing is way stronger than you’ll ever need.

Only feedback thus far is that it’s really too heavy for a keychain, at least for my keychain. Thinking about cutting one off near the finger hole and then drilling a hole vertically so it’s just the L part and the keyring becomes the handle if that makes sense.

Sorry one other bit of feedback, I think it would look better if the profile outside the fingerhole was a circle concentric with the hole. This would also shave a few grams.
Click to expand...


Jim, thanks for the feed back. Iphone screens I found to be hit or miss due to protective covers. Some ATM/Gas are smaller and so you use the bottom corner of the "bump" on the end. Hope that makes sense.

I wanted to offer both, extension w/ the key hole and no extensions but I didn't get any demand for just the setup you are describing.

Thanks again Jim for the feedback.
 
Got my 4 today. Looks great and everyone I have given one to can't believe how practical they are. Thanks......... Chuck
 
This looks interesting, and not to sound like a troll.

What's the advantage of this, vs just using nylon gloves? To make my gloves stretch farther, I just expose them to sunlight each time I take them off. Presto, chango, no covid.
 
Last edited:
pinkbunny said:
This looks interesting, and not to sound like a troll.

What's the advantage of this, vs just using nylon gloves? To make my gloves stretch farther, I just expose them to sunlight each time I take them off. Presto, chango, no covid.
Click to expand...

Trying to find gloves is next to impossible and I have to have them for work. So I'm not using then unless I have to.

I got my Wuhan Wand and love it. My first use was at the Dr.s office this morning. It will pay for itself in less than a month.

Sent from my SM-J320V using Tapatalk
 
You must log in or register to reply here.
Back
Top Bottom