Bought a new dozen arrows and changed the length and tip weight on them so I had to re tune my bow before 3D starts. I've been shooting bare shaft and got it shooting really well out to 35 yards. Fletched an arrow and shot it along side the bare shaft. After a little tweaking of the cable guard to change the cam lean I had the bare and fletched side by side. Then I took 6 of the arrows and had planned on spending a day or two knock tuning the arrows. Well, they don't need it. Shot this from 10 yards to keep things simple. But I only had the one flyer and when I re shot that arrow it went in the hole with the rest of them. And of those 6 arrows only one was fletched, so 5 of the arrows in the same hole were bare shaft. I'm just using the dot as an aiming reference, so hitting it is not the point yet. Now that I know everything is good I'll be resighting it in the next few days. And fletching some arrows.
Last edited: