Tilt it slightly to the rear when in use.
Call Hornady. I think there is a replacement tube they will send.
I hear good things about the RCBS.
I have two loads for my 308.
175gr supers at 2650fps and 200gr subs at 990fps. I know the dope for changing between them.
I sometimes swap over...
Neutral and ground should be tied together.
Same in three phase.
A separate neutral is code required if you use a leg for 120V BUT it's not a...
Alessi ankle rig.
Best one I ever used.
I'm using 180gr around 1900fps with lil gun.
Sounds like a 30-30 to me.
Do you reload?
If so, you will be impressed what 357mag will do from a 20" barrel.
You can get 30-30 ballistics from it.
I have a 2016 Honda fit w/33k on it I'm not opposed to parting with.
Curious how the 327 does in a rifle length barrel? Use a slower powder?
No need for for subs in mine.
It will keep Federal bulk pack subsonic with the short bbl.
I prefer CCI standard velocity. It's movie quiet.
Great minds. Are you planning to use the OEM front sight?
Does it short stroke without the back pressure from the can?
If only they tasted like chicken.
I've eaten the hell out of Beondegi.
I ain't scared of a little crunch.
I like to degrease a new bore with break cleaner then flitz it a few strokes.
Seems to clean up much easier with less copper fouling.
Catfish get smart real fast.
Common wisdom for farm ponds is never throw a catfish back because you will never catch it again.
I have multiple saws but if I had to choose one it would be my 261. It's a sweetheart that punches way above it's weight class.
I vote 18" on a 50cc saw.
My recommendation is a Stihl MS261 CM.
If price was the same I still would have bought the Honda due to it's narrower width, engine and tranny and resale value.
I've had a Stihl FS110 R for 15 years now.
I replaced the primer bulb as a preventative maintenance item. It's a 4 mix model.
I'd buy another one...
I looked at both the Honda and Yamaha.
I like them both. The Yammy is belt drive but it has a 10yr warranty on the belt vs the automotive style...
That slide looks newer than my 2008 model Grock 17!
Did you put it in the easy bake oven with a sharpie or something?
Separate names with a comma.