1" wrench

[KnotRight]

Looking for a 1" wrench that is no thicker than .3" wide. Any idea where to find one?

 

[LeeMajors]

Harbor freight and a grinder. Been there looked high and low for one

 

[KnotRight]

@LeeMajors Northern Tool has a set listed on their website (Flat Wrenches) but did not have any in the store. I think I am going to by a 1" or 24mm wrench and grind it down.

 

[LeeMajors]

@LeeMajors Northern Tool has a set listed on their website (Flat Wrenches) but did not have any in the store. I think I am going to by a 1" or 24mm wrench and grind it down.

Yep. I bought that set and took them back. Iirc they were .385 or some such thick

 

[KnotRight]

Link

https://www.northerntool.com/shop/t...4qLRq-x5HxRGKT0drBo8ptrC89B2ogzhoCB3UQAvD_BwE

 

[LeeMajors]

Link

https://www.northerntool.com/shop/tools/product_200637939_200637939?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Hand Tools > Wrenches > Combination Wrenches&utm_campaign=Grip&utm_content=45779&&lid=92700047077753470&ds_s_kwgid=58700003118431791&ds_e_product_group_id=663424034318&ds_e_product_store_id=&ds_e_ad_type=pla&ds_s_inventory_feed_id=97700000001662305&gclid=CjwKCAjwg6b0BRBMEiwANd1_SJ7hZ8GNNDfxIIGRLCxk5g4qLRq-x5HxRGKT0drBo8ptrC89B2ogzhoCB3UQAvD_BwE

Yeah. It wasn't those. I'd be afraid to put much torque on those

 

[KnotRight]

Just bought this one off E-bay
Matco USA SPW143 1" 4 Way angle head wrench

 

[BigWaylon]

This would’ve been the solution for <$6 and a quick grind to open it from 25mm to 25.4mm...

http://www.bikeman.com/store/merchant.mvc?Screen=PROD&Store_Code=BIKEMAN&Product_Code=CC-59513

 

[BowWow]

https://m.northerntool.com/shop/too...U5SGfzMLJrZd1c48pdZMhjTdXFsC_00BoCZnIQAvD_BwE

A lot of water pump or fan wrenches are thin.

 

[Beef15]

Was gonna suggest angle wrenchs they're usually a little thinner. Pretty sure my Martins are about .25"

 

[KnotRight]

Got this in today.

 

[McDirkale]

@LeeMajors Northern Tool has a set listed on their website (Flat Wrenches) but did not have any in the store. I think I am going to by a 1" or 24mm wrench and grind it down.

I think...24mm is actually more like a 15/16". Really close anyway.

 

[Schattenreiter]

I think...24mm is actually more like a 15/16". Really close anyway.

Yeah. 1 in would be 25.4 mm