22 can suggestions

Gray

Gray

Canadian bacon is ham
2A Bourbon Hound 2024
2A Bourbon Hound OG
Benefactor
Life Member
Multi-Factor Enabled
Joined
Dec 17, 2016
Messages
3,064
Location
WNC
Rating - 100%
58   0   0
This will be my first can.

I know that by the time I get it out of NFA jail it will be a year old already. But I still want to make the best choice I can now. I plan on buying in the next month or so, just need the logistics to work for travel.

I think I know what I am after but wanted to get suggestions here just to cover my bases.

while I’m not made of money, I’m a buy once cry once kinda guy. This will be moved around from a CZ457 to pistols and if it’s still there tomorrow the takedown charger I’ve wanted for some time.

What say ye CFF?
 
If you want to try out my Specter II just holler.
 
That’s some negative thinking...6 months man. 😎
 
If I was buying another one, my short list would be:

Dead Air Mask
Rugged Oculus
Silencerco Switchback

Dead Air would be first, the other two would be a toss-up.

The others I’d at least look at, in no particular order:
Rex MG22
EA Nyx
TBAC 22TD
AAC Halcyon
CGS Hydra SS


I wouldn’t really hesitate to buy a Spectre, but I already have three of them....so I’d pick something else for my next one.

I have an Element 2, which I’d highly recommend if they weren’t discontinued.

I have a couple Warlocks, which are super light, but I wouldn’t recommend one for a first rimfire can since they’re limited to 22LR only and tougher to clean being all aluminum.

I also have a Sparrow, and I wouldn’t take another one if it was free and all I had to do was buy the stamp.
 
Chdamn said:
I don’t think I can come up with 22 separate can recommendations. I usually just recommend number 10 cans. Perfect size for canning.
Click to expand...
:rolleyes:
 
I’m new to the stamp collecting world, but absolutely love my Dead Air Mask .22.
 
I have the sig srd22 and it’s probably one of the quietist (to my ear) that I’ve shot, even on pistols. Comes apart for cleaning even after hundreds of rds. Im Seriously thinking of getting the gemtech gym-22 as well. Seems to be around the middle of the pack as far as db reduction, low 120s. But first round pop is loud from what I’m reading. But at 2.5oz and 5” long, it’s stupid light and short. I’m thinking a 10/22 charger with 4-6” barrel and the gm-22 would be a wet dream.
 
62957627-6F65-4E58-A183-551175C40D4C.png
 
I might have bad news for you...
you may wind up with 2 or 3 22 cans...
longer rifles don't need as much can to control the blast, which is good because strapping all that extra onto a long barrel makes longboi. pistols seem like you want a short can, but that's sometimes not enough internal volume to control the blast.
there's no perfect solution, just buy a bunch.
 
I have at present 3 .22 cans, a Bowers Bitty, a Coastal Gun Passport, and an OSS RAD 22. Here are my thoughts:

-The Bitty is super small and light, the box it comes in is the same size as a 50 round box of .22 LR without a plastic tray....think Winchester Wildcat box. It works quite well on long guns, especially bolt guns. It is easily hearing safe. On handguns it does provide significant suppression but it isn't really comfortable to shoot them without hearing protection. It is really a fun little can but it isn't the right choice for a first or only .22 suppressor.

-The Coastal Passport was my first NFA item and I bought it from a local gun shop with basically no research. It cost about the same as the stamp and it was an easy way to get my feet wet in the NFA world. That said, it is a really effective can. I've got thousands upon thousands of rounds through it. It is very quiet on both pistols and rifles, it is light, and it is easy to disassemble. My only complaint about it is it is all aluminum and that makes it a lot harder to clean than cans made of other materials and somewhat less durable. I wouldn't buy it again based on what I know now but I'm also not unhappy that I own it. I still use it pretty regularly.

-The OSS Rad 22 is the one of the three I would keep if I could only keep one. It works as well or better than the Passport while being more durable and easier to clean. It is a little heavier than the Passport but it is actually shorter. It cost about twice as much as the Passport but that still makes it pretty reasonably priced. I would absolutely buy it again and I would recommend it to others. It also happens to be in stock at Silencer Shop at the moment.

I'm probably going to get at least one more .22 can. I haven't decided on which yet but I'm thinking about the Rugged Oculus.
 
Landric said:
I have at present 3 .22 cans, a Bowers Bitty, a Coastal Gun Passport, and an OSS RAD 22. Here are my thoughts:

-The Bitty is super small and light, the box it comes in is the same size as a 50 round box of .22 LR without a plastic tray....think Winchester Wildcat box. It works quite well on long guns, especially bolt guns. It is easily hearing safe. On handguns it does provide significant suppression but it isn't really comfortable to shoot them without hearing protection. It is really a fun little can but it isn't the right choice for a first or only .22 suppressor.

-The Coastal Passport was my first NFA item and I bought it from a local gun shop with basically no research. It cost about the same as the stamp and it was an easy way to get my feet wet in the NFA world. That said, it is a really effective can. I've got thousands upon thousands of rounds through it. It is very quiet on both pistols and rifles, it is light, and it is easy to disassemble. My only complaint about it is it is all aluminum and that makes it a lot harder to clean than cans made of other materials and somewhat less durable. I wouldn't buy it again based on what I know now but I'm also not unhappy that I own it. I still use it pretty regularly.

-The OSS Rad 22 is the one of the three I would keep if I could only keep one. It works as well or better than the Passport while being more durable and easier to clean. It is a little heavier than the Passport but it is actually shorter. It cost about twice as much as the Passport but that still makes it pretty reasonably priced. I would absolutely buy it again and I would recommend it to others. It also happens to be in stock at Silencer Shop at the moment.

I'm probably going to get at least one more .22 can. I haven't decided on which yet but I'm thinking about the Rugged Oculus.
Click to expand...
C87D6F32-8776-4A95-A895-2ED521FBA13F.jpeg
 
I've had a Silencerco Sparrow for 8 years, but the FRP (first round pop) is annoying and unless you are comfortable with using the dip method for cleaning I would not recommend it. Aside from those two issues it has been a 100% reliable and solid rimfire can for tens of thousands of rounds from a bevy of hosts.

I have friends that own the Dead Air Mask, Silencerco Switchback, and Surefire Ryder 22-S. Of those three the Dead Air mask will be my next rimfire suppressor.

www.silencershop.com

Dead Air Mask

The Dead Air Mask 22 HD is a 6.6-ounce, 5.1-inch user-serviceable rimfire suppressor constructed of titanium and stainless steel with impeccable performance.
www.silencershop.com www.silencershop.com
 
Bunsen said:
I've had a Silencerco Sparrow for 8 years, but the FRP (first round pop) is annoying and unless you are comfortable with using the dip method for cleaning I would not recommend it. Aside from those two issues it has been a 100% reliable and solid rimfire can for tens of thousands of rounds from a bevy of hosts.

I have friends that own the Dead Air Mask, Silencerco Switchback, and Surefire Ryder 22-S. Of those three the Dead Air mask will be my next rimfire suppressor.

www.silencershop.com

Dead Air Mask

The Dead Air Mask 22 HD is a 6.6-ounce, 5.1-inch user-serviceable rimfire suppressor constructed of titanium and stainless steel with impeccable performance.
www.silencershop.com www.silencershop.com
Click to expand...
I have yet to notice FRP with the Sparrow ive had for over 8 years.
Why would you pick the Mask over others?
BigWaylon said:
If I was buying another one, my short list would be:

Dead Air Mask
Rugged Oculus
Silencerco Switchback

Dead Air would be first, the other two would be a toss-up.

The others I’d at least look at, in no particular order:
Rex MG22
EA Nyx
TBAC 22TD
AAC Halcyon
CGS Hydra SS

I also have a Sparrow, and I wouldn’t take another one if it was free and all I had to do was buy the stamp.
Click to expand...
Looking at the build (Ti-9), I'd lean towards the TBAC. Why would you pick the Mask over others?
 
Pink_Vapor said:
I'm confruzed. What do you mean by modularity? They both appear to have a very similar build design.
Click to expand...
I was answering based on this part:

9F6EA5B8-B723-4BDB-8BFF-FF532A56102C.jpeg

If you’re talking about the entire list, I just like the combination of materials, performance, the company, the overall design, length and weight.
 
Pink_Vapor said:
I'm confruzed. What do you mean by modularity? They both appear to have a very similar build design.
Click to expand...
the modular ones let you run at say 7", but if you want something shorter and don't need all 7", you can pull off a 3" section, move the endcap from the section and put it on the main body, and run at 4" instead.
seems to be a newer trick a lot of cans are doing.
 
DrScaryGuy said:
the modular ones let you run at say 7", but if you want something shorter and don't need all 7", you can pull off a 3" section, move the endcap from the section and put it on the main body, and run at 4" instead.
seems to be a newer trick a lot of cans are doing.
Click to expand...
That I get. I thought he said he'd pick the Mask over the TBAC due to modularity, which neither have.
 
Pink_Vapor said:
I have yet to notice FRP with the Sparrow ive had for over 8 years.
Why would you pick the Mask over others?
Click to expand...

FRP and cleaning are probably the #1 & #2 complaints about the Sparrow. You are in the minority not noticing FRP, I'd consider yourself blessed in that regard.

The reason I would take a DA Mask over a Silencerco Hybrid is because although the modularity is cool and gives you options, it does nothing for me. Also SiCo quality and CS has slipped a LOT since 2010.

The Surefire Ryder has a great tone and would be an excellent choice. It and the DA Mask are both top shelf. I choose the DA Mask because I like the click baffle stack it uses and how easy it is to clean. Iit will make my fourth DA suppressor, so I'm a little biased.
 
Bunsen said:
FRP and cleaning are probably the #1 & #2 complaints about the Sparrow. You are in the minority not noticing FRP, I'd consider yourself blessed in that regard.

The reason I would take a DA Mask over a Silencerco Hybrid is because although the modularity is cool and gives you options, it does nothing for me. Also SiCo quality and CS has slipped a LOT since 2010.

The Surefire Ryder has a great tone and would be an excellent choice. It and the DA Mask are both top shelf. I choose the DA Mask because I like the click baffle stack it uses and how easy it is to clean. Iit will make my fourth DA suppressor, so I'm a little biased.
Click to expand...
I’m curios as why BigWaylon would choose the Mask over the Thunderbeast (TBAC). I too am biased, towards TBAC, I’ve bought four.
 
I was in the market.... shopped, searched, read, checked prices and landed on the Mask 22 for several reasons. (also consulted with @BigWaylon and @Pink_Vapor )

I made my decision based on the following parameters:
Performance/Reviews - comfortably hearing safe on my hosts; exceptional reviews; clean ability, MOC, etc.
Price - Can I afford the can and the stamp?

Upon receipt... I was very impressed with weight, build and performance exceeded my expectations. That’s not to say there aren’t other great options (TBAC and others of course...), but I ordered based on availability and price after they met my performance needs/expectations.

After the dust settles and you look at the options, there’s a bit of a brand loyalty component here, but there are definitely differences in performance.

Side note - the Mask comes with a cool sticker too.
 
Last edited:
My TBA 22 takedown is still in jail. Hopefully will have it any day now, but you're welcome to check it out once I get it in hand if you like. I went with it due to my own research and talking to several people who had them. Came highly recommended and is my 1st can.
 
I really like my silencerco switchback, it works great on both rifle and pistol and lets you run it in a couple configurations. I am over in Selma if you want to try it out.
49258c99522eb7f0777292f9cb40bd30.jpg


Sent from my SM-G973U using Tapatalk
 
I’m liking my Rugged Oculus so far. Only shot it on a 10/22 at this point. Well built, can be shortened and taken apart for that word that starts with a “c” (not that “c” word you dirty bums)...I don’t like to do a lot of cleaning!
 
Jeffncs said:
After the dust settles and you look at the options, there’s a bit of a brand loyalty component here, but there are definitely differences in performance.
Click to expand...

By brand loyalty, you mean like your Ford vs Chevy people etc?


Sent from my iPhone using Tapatalk
 
Average Joe said:
By brand loyalty, you mean like your Ford vs Chevy people etc?


Sent from my iPhone using Tapatalk
Click to expand...
Yes. Speaking for myself... I’m very brand loyal to YHM. Great, affordable cans, but I’m also committed to their mounting system. My F1 uses the same mount and I’m lining up another F1 build which will use the same.

22 cans may not be reliant on a mount, but we’re creatures of habit. If YHM had a 22 can, I’d have considered it too.

All that aside, I love my DA Mask.
 
You must log in or register to reply here.
Back
Top Bottom