CZ Scorpion parts

teamglock2002

Well-Known Member
Benefactor
Life Member
Supporting Member
Joined
Dec 20, 2016
Messages
7,451
Location
High Point NC USA
Rating - 100%
43   0   0
Okay Scorpion owners what are the must have change out parts

Someone made a list on a thread but I am unable to find it.
 
Last edited:
Not a fan of the AK style safety but some sort of aftermarket safety levers are a requirement.

HBI trigger springs change the trigger from terribly heavy to reasonable

Grip (Magpul or YetiWurks)

Mags other than the smoke CZ ones prone to cracking. PSA and Magpul seem to work well.
 
Last edited:
I'd say grip, safety (or safeties), trigger, mag release. Then the rest depends on whether you're going to Form 1 or run a brace. You don't need any of the aforementioned for reliability, but as Spartan mentioned, finding the right grip angle and safety combo that works for you makes the gun a lot more fun to shoot and a lot easier to stay accurate.
 
I'd say grip, safety (or safeties), trigger, mag release. Then the rest depends on whether you're going to Form 1 or run a brace. You don't need any of the aforementioned for reliability, but as Spartan mentioned, finding the right grip angle and safety combo that works for you makes the gun a lot more fun to shoot and a lot easier to stay accurate.

These! I also swapped in an extended charging handle. I didn’t care for the AK safeties, so I went with HBI’s thumb safety selectors instead
 
These! I also swapped in an extended charging handle. I didn’t care for the AK safeties, so I went with HBI’s thumb safety selectors instead
I forgot about the charging handle. I opted for the HBI polymer one and put the OEM one on the weak side so now I have an I charging handles.
 
Not a fan of the AK style safety but some sort of aftermarket safety levers are a requirement.

HBI trigger springs change the trigger from terribly heavy to reasonable

Grip (Magpul or YetiWurks)

Mags other than the smoke CZ ones prone to cracking. PSA and Magpul seem to work well.

Do the mags for the AK-V work with the Scorpions or do you need the ones labeled Scorpion? I see PSA has 2 different magazines, one for the AK-V and one for the Scorpion. Naturally, the Scorpion ones are OOS but the AK-V are in stock
 
Safety levers, trigger and a stock or brace are musts!

Some of the after market grips have a more vertical angle....which is more comfortable for some.
 
Do the mags for the AK-V work with the Scorpions or do you need the ones labeled Scorpion? I see PSA has 2 different magazines, one for the AK-V and one for the Scorpion. Naturally, the Scorpion ones are OOS but the AK-V are in stock
I don’t use the PSA mags but I’m 90% sure they’re the same. I vaguely recall something different about the followers between the AKV and Scorpion labeled versions.
 
Ordered all the parts suggested except for the charging handle which was on BO. Figured I wait and do it in one disassembly job.
Thanks for the input

TG2002
 
Last edited:
I only got the HBI trigger springs and an adapter to use ar15 pistol grips
 
Back
Top Bottom