Extended barrel for Micro Roni?

bigfelipe

Phil-osopher...
Charter Life Member
Joined
Dec 18, 2016
Messages
9,029
Location
Triangle
Rating - 100%
41   0   0
Anyone have an MCK Roni and use an extended barrel in it? I'm getting a Glock 20 and considering an MCK and 6 1/2" barrel as a "PCC"/hunting option for it. With the braced chassis, an RDS/optic, and the longer barrel it would make for a great compact pig gun I bet

MCK-3.jpg
 
Can't help with the longer barrel question but, how did you get that Roni to levitate in that pasture? What kind of monster are you?
The force is strong with him
 
@Flashpoint had an extended barrel I believe.

Sent from my Pixel 3a XL using Tapatalk
 
Can't help with the longer barrel question but, how did you get that Roni to levitate in that pasture? What kind of monster are you?

The kind that can copy and paste from the interwebs, lol... I don't have one. Haven't procured the Glock yet either. Just researching at this point.
 
I have an CAA Gear Micro Roni Stabilizer MCK with Glock 19 Gen 4 and a Gen 2 CAA Gear Micro Roni Stabilizer with a 10” barrel using a Glock 19.

I did not modify my CAA Gear Micro Roni Stabilizer MCK with Glock 19 Gen 4 because I didn’t want to do extensive re-engineering to adapt mine for Suppressor use.
2f19421bc4a34f0b908f3192d73b177c.jpg


IGB Austria (from YRS, INC) from YRS, INC sells extended barrels for various calibers.

I have my IMI Kidon Pistol Conversion outfitted with a g17 and threaded Glock 17L Barrel.

My purposes have been for Suppressor use. These suppressors require more than just barrel changes, since weight and additional points of contact affect the Suppressor host.

Mind you, I’m using 9 mm, though.
34213c763b5cf5315f3e4469a223e4e7.jpg
68655b80be512bfa274a0598e80e037f.jpg
24c1a85bb02a84dc2bc8fb6ff0661ea0.jpg



Sent from my iPad using Tapatalk Pro
 
Last edited:
I traded mine off when I got a Scorpion.

Kind of miss it.

Mine was the Micro-Roni with G17 on board.

I bought a longer barrel but could not use it without modification to the Roni so I did not pursue it. Others have.
 
Pretty sure there was a thread on arfcom outlining what was required to fit the extended barrel. IIRC the guy had to really hack up the front end to get it to cycle correctly.

I'll see if I can track down the link.


Sent from my iPhone using Tapatalk
 
I had a 9" 40s&w barrel in mine. I had to take it apart and remove the metal piece at the muzzle end to get it to function. It still felt solid and worked great, but it was impossible to remove the Glock without going through all that again.

I liked it because it moved the .40 muzzle blast farther away from my face and gave it a little more umph, but eventually even a Glock will get dirty enough to malfunction with a ridiculously oversized barrel and there was no good way to clean it so it went back to stock.

I also tried just a threaded barrel but even that prevented the Glock from being removed, and being able to switch from handgun to braced pistol is half the value of the thing.

Sure did look cool though.

20170505-192209.jpg
 
Last edited:
Pretty sure there was a thread on arfcom outlining what was required to fit the extended barrel. IIRC the guy had to really hack up the front end to get it to cycle correctly.

I'll see if I can track down the link.


Sent from my iPhone using Tapatalk

I had to hack up my CAA Gear Micro Roni Stabilizer to outfit the longer barrel. I posted on AR 15. Com also


Sent from my iPad using Tapatalk Pro
 
Thanks for the replies guys. I don't really care about suppressor use. I do have a 40/10 neilson device for my Isis II .45 can but I don't anticipate using it much on the G20. My primary goal is to maximize velocity, as I know the 10mm picks up some serious speed with a little more barrel length.

Sounds like the effort isn't worth it though if you can't remove the pistol from the Roni. Still may get one just for GP...
 
Back
Top Bottom