Form 1 suppressor help

Cluck Norris

Cluck Norris

Founding Inglorious bastard
Charter Member
Benefactor
Supporting Member
Joined
Dec 17, 2016
Messages
2,739
Location
I'm under your bed
Rating - 100%
52   0   0
There was a company out there selling solvent trap kits that were threaded to take the silencer co adapters, q cheery bomb, and a few others, any one have a link
 
I am actually thinking about this too.

Logically the process should be e-file form 1, once you have the stamp order the kit, kit arrives and you engrave your mark and serial, then you assemble

Sent from my Pixel 2 using Tapatalk
 
mig1nc said:
Logically the process should be e-file form 1, once you have the stamp order the kit, kit arrives and you engrave your mark and serial, then you assemble
Click to expand...
You could swap several of those steps around and still be just fine...
 
Last edited:
Last edited:
Tim said:
You da man. just place my order.
Click to expand...
I didn’t even know that item existed, but I can definitely see there should be a market for it.

Let me know if it works. I’m assuming the old SDTA tubes are the standard Maglite threads, similar to Apogee.

...and let me know if you need an ASR adapter that works with it. :D
 
When you submit your form-1, do you just list the length of the tube, or length of the tube plus the plan-d?

Sent from my Pixel 2 using Tapatalk
 
mig1nc said:
When you submit your form-1, do you just list the length of the tube, or length of the tube plus the plan-d?
Click to expand...
I’ve always submitted mine with both ends attached. They’ll approve it either way as they have no idea what you’re building.
 
BigWaylon said:
Have you been able to shoot it, yet?

Everything screw together just fine? Alignment looks good?
Click to expand...

looks good, but haven’t used it yet. Not likely to until I get it re-cored.
 
You must log in or register to reply here.
Back
Top Bottom