Gas Key staking around Raleigh?

[Langley]

Putting a BCG together and need my gas key staked. I know how it looks doesn’t make a difference but dang the Sionics just look so nice and clean. Anyone know of someone who can do this? Putting a POF NP3 key on and will have ocks screws.

 

[DrScaryGuy]

when all else fails...

AR-15/M16 CARRIER KEY STAKING TOOL | Brownells

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer ...

www.brownells.com

 

[Langley]

when all else fails...

AR-15/M16 CARRIER KEY STAKING TOOL | Brownells

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer ...

www.brownells.com

I was looking at that one earlier today. Some reviews were saying the staking screws were too sharp and cutting instead of pushing the metal. Was hoping someone local had a moacks jig

 

[Whoknows]

I was looking at that one earlier today. Some reviews were saying the staking screws were too sharp and cutting instead of pushing the metal. Was hoping someone local had a moacks jig

I’ve got one of the Brownells tools you’re welcome to try. Works fine in my opinion.

 

[Langley]

I’ve got one of the Brownells tools you’re welcome to try. Works fine in my opinion.

Going to check around and see what I can find. I might have to take ya up on it next week.

 

[georgel]

I've got a Moacks, but I'm in SC.

 

[Langley]

I've got a Moacks, but I'm in SC.

Little too far of a drive 😢

 

[Chuckman]

Punch and a hammer?? Just enough of an indent it doesn't unscrew. But make sure it's torqued correctly before you dent it.

 

[Langley]

Punch and a hammer?? Just enough of an indent it doesn't unscrew. But make sure it's torqued correctly before you dent it.

Yeah sealed it and torqued to 55 in-lbs. Probably will recheck the screws and just do a field staking on it. Simple and worked for years.