Hawkins Innovative Tech

Tatershooter

Tatershooter

Member
Charter Life Member
Joined
Dec 18, 2016
Messages
1,561
Location
Duncan
Rating - 100%
10   0   0
Anyone have any experiences with Hawkins Innovative Tech? Good or bad? Looking at their 8" aluminum 9mm solvent trap kit for an ar9 pistol.
 
Do they have something advertised as 9mm? I didn’t dig around too much, but I saw B-sized and D-sized.

Based on the pics I see, no way I’d buy them. Those cones are too flat.
 
BW are you also thinking 50 or 60 degree cones? I am looking for a "D" size trap. I am guessing the aluminum cones will not last as long as Ti. Also, I am not sure about their aluminum verses Ti spacers
 
Tatershooter said:
BW are you also thinking 50 or 60 degree cones? I am looking for a "D" size trap. I am guessing the aluminum cones will not last as long as Ti. Also, I am not sure about their aluminum verses Ti spacers
Click to expand...
This is what I saw when I looked for aluminum kits:

DFC8A45B-F73F-4A3F-A446-788415EC1123.png

Aluminum cans have been around forever. Shouldn’t matter for spacers. I’d rather have 1-2 steel ones for the blast baffle.

50°-60° cones seem like a better option. Or even use one of the Hawk kits and have ECCO “recore” it and replace the first two baffles, or shorten some of the spacers and add two baffles.

Quietbore makes a complete kit. I’ve never shot one but lots of people seem to like theirs.
 
Thanks BigWaylon and Johnny, there are so many choices out there and I am new to this game.
 
You must log in or register to reply here.
Back
Top Bottom