Magazine Feed Problem

ECNC

FUBAR
2A Bourbon Hound 2024
2A Bourbon Hound OG
Supporting Member
Multi-Factor Enabled
Joined
Feb 1, 2017
Messages
2,263
Location
Pasquotank NC
Rating - 0%
0   0   0
This is a CZ-50 magazine. The first three rounds put into the magazine sit correctly. Angled upwards. As soon as you put four or more rounds in the magazine the bullets sit flat and will not feed correctly into the chamber. I replaced the magazine spring and this helped a little bit, but did not fix the problem.

I am not sure at this point if the follower has to be bent a little or the lips on the magazine need to be adjusted. HELP?

Pictures below

IMG_1553.JPG IMG_1554.JPG IMG_1555.JPG
 
Last edited:
Back
Top Bottom