My form 1 Finished update

Cluck Norris

Founding Inglorious bastard
Charter Member
Benefactor
Supporting Member
Joined
Dec 17, 2016
Messages
2,734
Location
I'm under your bed
Rating - 100%
52   0   0
I talked about this in a previous thread, so I thought I would show it off a little. TI tube (b cell) with SS baffles, TI end cap and cut to fit the gemtech lid. I am just starting to dabble in the form 1 suppressor world so this one is mainly going to live on my evo 3. It is going to be for 9mm pistols and carbines, but since it has removable baffles I am going to try it on a 22lr running some subsonic ammo and see how it does.
After I have played with this one for a few months I and gained some knowledge I will build a 45cal can and dedicated 22lr can.
You might ask why do a form one suppressor when there are so many affordable options out there. Well, I like to do things my self, I really like to tinker, and the wait time is down on these (sitting at ten weeks last I heard) apposed to the 10ont period for form 4's.

The reason for going with this tube was it was TI, the b cells have a pretty thick wall so it should handel heat very well, and its main purpose is to live on pistols
20190325_233940.jpg
 
Pics of baffles? Or at least a description?
 
A few people Im in contact with that sent in on the same day that I did got theres back on 4/4, so I contacted the ATF to make sure that they received my fingerprint cards. I GOT AN EMAIL BACK FRON AN ACTUAL PERSON ALMOST INSTANTLY! It Is sitting in the processing queue, And she said it is likely to be processed this week. I made sure to give a big thank you for the quick response and let her know how much I truly appreciated her getting back to me so quickly.
 
A parts list would be awesome. I'm interested in doing a 9MM can for my AR9.
 
A parts list would be awesome. I'm interested in doing a 9MM can for my AR9.
This tube with there end cap. I am foinf to go ahead and tell you, titanium is a pain to drill.
https://solventtrapsdirect.com/titanium-b-cell-solve
Will thread onto any gemtech LID adapter, I will have to find where I found the stainless baffles, that was the hard part. There b cell is a little odd in size 1.313, the baffles I found were 1.311 And it took a deep dive of the interwebs to find them in stainless.
I ordered the lid adapter off line, good thing about this is you can use the liberty suppressors booster or the gemtech
 
Last edited:
This tube with there end cap. I am foinf to go ahead and tell you, titanium is a pain to drill.
https://solventtrapsdirect.com/titanium-b-cell-solve
Will thread onto any gemtech LID adapter, I will have to find where I found the stainless baffles, that was the hard part. There b cell is a little odd in size 1.313, the baffles I found were 1.311 And it took a deep dive of the interwebs to find them in stainless.
I ordered the lid adapter off line, good thing about this is you can use the liberty suppressors booster or the gemtech
What about a trilug adapter, like the Rugged one?
 
What about a trilug adapter, like the Rugged one?
I think this one will, keep.in mind there are suppressors that will perform better, but like I said I enjoy doing things my self ajd the 12 day waiting period makes it for me. Im going to play with a d cell next.
Roughly 275ish in this one not counting tax stamo and it will do my 357 lever gun, 9mm, and 22 lr since the baffles are removable.
To my knowledge there I dont know of a centerfire that can be used on rem fire. I hope to have it finished in the next couple weeks as time allows.
 
Back
Top Bottom