NFA pic thread
- Thread starter 11B CIB
- Start date
- Replies 1,403
- Views 123,444
Partsfreak
Just Farted
10/22 with extra Tacsol barrel & Sparrow.
CHRIS_WNC
Member
Most of mine. Missing an SBS 590, SBR T/C Contender, and another SBR AR15.
SBR AR in 300BLK with Rev 45. SBR Remington 700 in 300BLK with SWR Omega 30. SBR LDR-9 (9mm) with Rev 9. SBR AR with .22lr Kuehl conversion and Outback II.
CHRIS
SBR AR in 300BLK with Rev 45. SBR Remington 700 in 300BLK with SWR Omega 30. SBR LDR-9 (9mm) with Rev 9. SBR AR with .22lr Kuehl conversion and Outback II.
CHRIS
RockRiver
Happy to be here
So the mk3's magazines are a bit different. They will not completely seat into the mk IV 22/45. It looks like the baseplate is a bit longer in the rear on the old magazines. There is also a cutout that I cant determine the purpose. The loading button is also flatter on the new magazines.RockRiver said:
wolfpack65
Queen Bee
The Omega finally got out of jail!
Just put it on the 300Blk for now but didn't shoot it this afternoon.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm1.staticflickr.com\/431\/32065482232_f5dbc34a35_z.jpg"}[/IMG2]
Just put it on the 300Blk for now but didn't shoot it this afternoon.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm1.staticflickr.com\/431\/32065482232_f5dbc34a35_z.jpg"}[/IMG2]
Partsfreak
Just Farted
Newest build. Glock Polymer 80 With can
Last edited by a moderator:
CHRIS_WNC;n35523 said:For night time attack possums.
CHRIS
Nice! How did you attach handguard to chassis?
Been looking at these and really want to build one. They sell a carbon handguard on their site but not loving it.
JustKeepSwimming
AKA dingleberry
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
DnB_TeK;n51521 said:Case Club.....
2X LIKE for the awesome collection and your sig line.
CHRIS_WNC
Member
NKD;n52169 said:
I had to machine that little notch at the rear of the FF tube where it contacts the chassis. Also made a little backer plate thing that is used to attach the tube to the chassis through its existing holes. Like those add-on pic rail pieces attach to the modular tubes. They were out of the CF tube when I got my chassis so I came up with this. You need the narrow tube so the diameter matches.
CHRIS
Lee_Dingle
Be Awesome.
A few of my favorite things.
Partsfreak
Just Farted
I love that!
Partsfreak
Just Farted
Old pic of my 10/22 TD. Have a QD red dot for it now too.
This is a 300 BO pistol on an 80% lower, while I wait for a Form 1 to clear for an SBR on an Anderson receiver. It's a HVT QuickMount can.
I just finished taking about 3/8" off the hanguard (from the receiver side ) so that the suppressor would have enough room to snap into place with it's spring attach .
I just finished taking about 3/8" off the hanguard (from the receiver side ) so that the suppressor would have enough room to snap into place with it's spring attach .
Attachments
Last edited by a moderator:
My youngest's first time out with the SBR. By the end of the day it was her favorite.
[video=youtube_share;UpmwWyTjKD4]https://youtu.be/UpmwWyTjKD4[/video]
[video=youtube_share;UpmwWyTjKD4]https://youtu.be/UpmwWyTjKD4[/video]
Lee_Dingle
Be Awesome.
Lee_Dingle
Be Awesome.
davekeller
Happy to be here
I totally didn't know this site was a thing and wondered where everyone went. I'll post my last batch of rad NFA stuff here. I have some more stuff to come that I'm pumped about!
I just got this custom rifle in after it being on order since September. It shoots very well and I had a few shots go through the same hole. I didn't shoot too many groups but got it out to 100, shot a nice group and then shot steel at 300 yards. I hit a 4" steel plate with boring repetition with this rifle.
BUILD LIST
Caliber: .308
Barrel: 18.5†1–10 Bartlein M40 Straight Fluting
Muzzle: SilencerCo ASR
Suppressor: SilencerCo SpecWar 762
Bolt Knob: Large 3 Line
Bolt Fluting: Spiral
Trigger: Timney Wide
Bottom Metal: Badger M4 Steel
Receiver: Remington 700
Rail: Seekins 20 MOA
Recoil Lug: Hollands
Stock: McMillan A1-3 Desert Camo
Cerakote: Graphite Black
Scope: Nightforce NXS 3.5-15x50
Rings: Nightforce UltraLight Low
Ammo: Nosler SSA 168gr. HPBT
Video: https://www.instagram.com/p/BOqKPA1hitg/
Here's my 100 yard group:
Range photos:
I just got this custom rifle in after it being on order since September. It shoots very well and I had a few shots go through the same hole. I didn't shoot too many groups but got it out to 100, shot a nice group and then shot steel at 300 yards. I hit a 4" steel plate with boring repetition with this rifle.
BUILD LIST
Caliber: .308
Barrel: 18.5†1–10 Bartlein M40 Straight Fluting
Muzzle: SilencerCo ASR
Suppressor: SilencerCo SpecWar 762
Bolt Knob: Large 3 Line
Bolt Fluting: Spiral
Trigger: Timney Wide
Bottom Metal: Badger M4 Steel
Receiver: Remington 700
Rail: Seekins 20 MOA
Recoil Lug: Hollands
Stock: McMillan A1-3 Desert Camo
Cerakote: Graphite Black
Scope: Nightforce NXS 3.5-15x50
Rings: Nightforce UltraLight Low
Ammo: Nosler SSA 168gr. HPBT
Video: https://www.instagram.com/p/BOqKPA1hitg/
Here's my 100 yard group:
Range photos:
davekeller
Happy to be here
Some future testing of the next tax stamp I'm filing and the MK23 this weekend.
amnesia
.
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Life Member
Supporting Member
Multi-Factor Enabled
How is the kriss without it being an SBR? That's the next gun I'm ordering, hopefully! I really want the 10mm but the only thing holding me back is they don't have 30+ round mags for them.davekeller;61640 said:Some future testing of the next tax stamp I'm filing and the MK23 this weekend.
Sent from my SM-G935V using Tapatalk
davekeller
Happy to be here
amnesia;n61721 said:
I really like it so far! I think it'll be perfect as a SBR but the brace is fine while I wait for now. I've shot it a fair amount and it's a real smooth shooter. I've since put an EoTech and 3-lug on it for my suppressor and a light. This will be my third 9mm SBR and I already like this more than my Evo and QC10 build.
amnesia
.
Staff member
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Life Member
Supporting Member
Multi-Factor Enabled
You're killing me. You needed to tell me it was terrible and I shouldn't do it. I have a scorpion SBR and working on an mpx SBR. The kriss is just one more expense I'll need to pony up for.davekeller;61869 said:
Sent from my SM-G935V using Tapatalk
Some of mine.
davekeller
Happy to be here
amnesia;n61935 said:
Yeah, the Kriss was always my first choice but they didn't have 9mm when I made my QC10 and I got the Scorpion right when the 9mm came out and the prices were like $1700+ so I didn't go for it. I found this one for $1k new and I had to go for it. After shooting it, I just love the ergonomics and how the recoil feels. It's a space gun and real gun. Plus I appreciate anyone making something new instead of yet another AR. I was looking at a MP5 SBR of some sort but in the end, Glock mags got me and this thing is so cool. I want to get an Octane 9K to put on it to shorten it up a bit in the future.
Here's the current config with the used military trade in EoTech I have on it. It's such a solid and fun combo and I feel like the boxy look of the Vector is begging for an EoTech.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/d3vv6lp55qjaqc.cloudfront.net\/items\/2D2J0N0D1i0s2h311S3A\/39C308D4-C359-428C-8F98-DC3BA7DA610A.JPG?X-CloudApp-Visitor-Id=594338"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/d3vv6lp55qjaqc.cloudfront.net\/items\/3z0r1o403u2b04401a18\/93B41E16-E28B-422E-BD55-156FF9AFE443.jpg?X-CloudApp-Visitor-Id=594338"}[/IMG2]
Last edited by a moderator:
Lee_Dingle
Be Awesome.
This thread needs a suppressed magazine fed shotgun too.
OP
davekeller I PMed you on CSC but the message might not have gone through right before I was banned. Sorry, bro
Great looking sticks as always
Great looking sticks as always