Pig cooker aficionados HELP!!

[1911gobang]

Okay, I️ have a pig cooker my FIL gave me, and I️ need to get the gas system up and running before 5 a.m. Thursday morning. I️ can weld like a m/f/n riot, but I️ know jack doodley SQUAT about breathers, venturis, low PSI, high PSI, BTU’s regulators, etc....

I️ think all I️ need is a low pressure (1psig ?) regulator for 80,000 BTU? Agri Supply has one that will do 119,000 BTU...what do I️ need? Time is NOT my friend lately, so no time to experiment

Pics of what I have...

Sent from my iPhone using Tapatalk

 

[1911gobang]

Heat box is approximately 4’ x 2’ x 2’


Sent from my iPhone using Tapatalk

 

[nchunt101]

Forget the gas and use wood. Thank me later.

 

[Chdamn]

Sorry I know nothing about gas cookers. Mine are coal

 

[Ghost1]

You’ll need a needle valve similar to this but with an orifice https://www.amazon.com/Bayou-Classi...d=1512434241&sr=8-3&keywords=gas+needle+valve

You’ll need an adjustable high pressure reg. Similar to this https://www.amazon.com/Bayou-Classi...coding=UTF8&psc=1&refRID=Q8CZDQKJSENC9APPYHVH

You’ll need a flare adapter to attach the hose to the needle valve, similar to this https://www.amazon.com/LTWFITTING-B...12434524&sr=1-4&keywords=3/8+flare+to+1/4+npt

 

[Get Off My Lawn]

Since you mentioned AgriSupply. West of their Garner location is a great LP parts supplier. Give them a shout.
http://fandgdistributing.com/index.html

 

[1911gobang]

Thanks guys...this is next weekend’s project...


Sent from my iPhone using Tapatalk