Precision Rimfire Pictures
- Thread starter brentona
- Start date
- Replies 26
- Views 2,090
OP
brentona
Well-Known Member
Same exact gun there
Mines just dressed up a little different. DIP trigger kit? That gun is absurd
Sent from my iPhone using Tapatalk
Where to start......CZ's, Anz, then Win 52's:
452
455
Anz 64R
Win 52B
Those are the main ones that I have glamour shots of. I also have an Anz 64 MPR and a Win 52D that I have somehow managed not to take a single photo of either in the 5 years I've owned them.
452
455
Anz 64R
Win 52B
Those are the main ones that I have glamour shots of. I also have an Anz 64 MPR and a Win 52D that I have somehow managed not to take a single photo of either in the 5 years I've owned them.
Yes I installed a lighter D.I.P. trigger spring and I have a D.I.P. 25 moa rail under the scope. I also just swapped out the bolt knob to an oversized, and I am very glad I did. It is so much easier to work the bolt now, with regard to leverage and scope proximity. And yes, this rifle is absurdly accurate. It is much more accurate than I am.
Nice rifles! How do you like your Winchester 52s? I am considering getting one.Where to start......CZ's, Anz, then Win 52's:
452
455
Anz 64R
Win 52B
Those are the main ones that I have glamour shots of. I also have an Anz 64 MPR and a Win 52D that I have somehow managed not to take a single photo of either in the 5 years I've owned them.
BurnedOutGeek
What's this button do?
Staff member
Charter Life Member
Benefactor
Multi-Factor Enabled
Did you swap to the kidd from the pws carbon wrapped barrel? If so, did you do it yourself? I hate the pws barrel on mine and I'm considering ditching it for a tacsol or kidd. But I know it needs to be shimmed for the head spacing to stay correct.PWS Summit T3 which now wears a SS KIDD barrel.
Sent from my SM-N910V using Tapatalk
Swapped it out myself. The shims were already there and mine mounted best without any.
Sent from my SM-N910V using Tapatalk
Thanks!
The 10/22 I put together for the youngin. CCI std is surgical.
PWS I put together for the wife. Worst barrel I've ever owned. Will be swapping it soon for something made by Kidd or Tacsol.
It's the PWS carbon wrapped, tension barrel. From everyone I've talked too, you either get one that shoots lights out or you get one that's garbage. I've got one last bit of ammo testing to do and then I'm swapping it.
D
Dadawada
Guest
CZ-455 in Boyd Coyote stock with Caldwell bipod and Nikon Rimfire scope. 2nd barrel, a .17 HMR is sitting in the bag.
Last edited:
FV-SR, Crossfire II 6-18 AO, Boyd's Pro Varmint in tacticool green.
T
The Green Heron
Guest
Anschutz 64 MPR
McMillan magnum varmint stock in woodland, bedded.
coated with KG Guncote, flat black
20 MOA rail from DIP, tactical bolt knob.
MK6 3-18 with MK 4 rings
McMillan magnum varmint stock in woodland, bedded.
coated with KG Guncote, flat black
20 MOA rail from DIP, tactical bolt knob.
MK6 3-18 with MK 4 rings
DPRC-Precision-Rimfire
New Member
The participants in this thread may find this interesting:
https://carolinafirearmsforum.com/index.php?posts/159107/
https://carolinafirearmsforum.com/index.php?posts/159107/
D
Dadawada
Guest
Thanks for sharing. I'd love to participate sometime.
hlpressley
Member
Savage Mark II FV-SR
Boyd's Tacticool stock
DIP metal bottom
Primary Arms 4-14x44 FFP scope
https://pixxxels.org/
Boyd's Tacticool stock
DIP metal bottom
Primary Arms 4-14x44 FFP scope
https://pixxxels.org/
DPRC-Precision-Rimfire
New Member
Go ahead and get on the email list by emailing to [email protected] then, so you'll get 2 weeks notice when match registration opens, and get all the details each time. Looking forward to seeing you there soon.