Recommend ar10 ff handguard

LeeMajors

LeeMajors

Bionic Man
Staff member
Charter Member
Life Member
Multi-Factor Enabled
Joined
Dec 17, 2016
Messages
8,394
Location
Lincoln county
Rating - 100%
20   0   0
Looking for an inexpensive 14 to 16 inch ff handguard. Psa which is the same as some low I believe. Also looking for a low pro gas block.

My google-fu isn' what it used to be.
 
it would be the same specs as an AR15. My PSA AR10 came with the MI knockoff version of Mlock, and their 2-screw lo-pro block. It's a .750 gas block I believe.
 
Ikarus1 said:
it would be the same specs as an AR15. My PSA AR10 came with the MI knockoff version of Mlock, and their 2-screw lo-pro block. It's a .750 gas block I believe.
Click to expand...

Are you saying a FF handguard made for an AR15 will fit an AR10, or you just talking about PSA's products?
 
Ikarus1 said:
Yes and yes
Click to expand...

Edit: Disregard the response below if we're talking only PSA.

That wasn't my experience. I bought a rail I saw on one of the ARs posted by @11B CIB. When it arrived, it wouldn't fit over the standard AR15 barrel nut. A couple of Google searches later revealed the AR10s use a different barrel nut, making AR15 rails incompatible. That's when I also found out it wouldn't simply fit onto my daughter's AR because hers was a PSA with a FF rail on a proprietary nut. I would have to swap it out with a standard barrel nut. Instead of going through that or the return process, I decided to offer it up here.

Also, in my searches, you had to choose even the right rail for your AR10 based on the rail height. Seems it was either low or high. My Bushy requires a low profile.
 
Last edited:
kcult said:
Edit: Disregard the response below if we're talking only PSA.

That wasn't my experience. I bought a rail I saw on one of the ARs posted by @11B CIB. When it arrived, it wouldn't fit over the standard AR15 barrel nut. A couple of Google searches later revealed the AR10s use a different barrel nut, making AR15 rails incompatible. That's when I also found out it wouldn't simply fit onto my daughter's AR because hers was a PSA with a FF rail on a proprietary nut. I would have to swap it out with a standard barrel nut. Instead of going through that or the return process, I decided to offer it up here.

Also, in my searches, you had to choose even the right rail for your AR10 based on the rail height. Seems it was either low or high. My Bushy requires a low profile.
Click to expand...
That's what I have found as well. Mine is the dpms low.
 
You must log in or register to reply here.
Back
Top Bottom