Trigger kits for G48?

fieldgrade

waiting...
2A Bourbon Hound 2024
2A Bourbon Hound OG
Charter Life Member
Benefactor
Supporting Member
Multi-Factor Enabled
Joined
Dec 16, 2016
Messages
28,968
Location
Wake/Harnett
Rating - 100%
14   0   0
I was looking at Apex Tactical and I don’t see any for G48/G43x, assuming I didn’t miss something. Who else has a good trigger kit for a G48?
 
I put a Zev in mine. I had an Agency Arms and switched to the Zev, can't tell much difference.
 
I put the Falx trigger from Precision Overwatch and a Ghost connector in my G48.
Lost over a pound of pull weight to end up at a smooth 4 lbs 11 oz on a 5 pull average. Very consistant, too...none of the five pulls varied more than 2 oz from the average.
 
I'm pretty sure that Glocktriggers.com has a trigger for the G48, pretty sure that their G43 trigger is compatible.
Very pleased with the 3 I have installed.
20% off currently as well.
 
Last edited:
I put a Zev in mine. I had an Agency Arms and switched to the Zev, can't tell much difference.
I shot a Zev pistol a day or so ago and there was no take up but beyond that it felt and measured 5lbs like an average Glock.
 
Last edited:
I shot a Zev pistol a day or so ago and there was no take up but beyond that it felt and measured 5lbs like an average Glock.
I do have a Ghost connector in mine, a staple in my Glocks. I haven't changed the trigger return spring or the plunger spring. It might lighten it some if I did but I'm content with it like it is.
 
I do have a Ghost connector in mine, a staple in my Glocks. I haven't changed the trigger return spring or the plunger spring. It might lighten it some if I did but I'm content with it like it is.
I am not unhappy with the trigger in the G48 honestly. As far as Glocks go it’s pretty good actually. I’ve had much worse. I put an Apex kit in an M&P 1.0 a couple of years ago and it was great, so I just want to be sure I’m not missing anything in the striker fire world.
 
@rantingredneck , Tom is a master Kydex bender. I have several of his holsters.
 
@fieldgrade , if you want to try a Zev trigger before you buy, I can pull mine out and send it to you. Try it a couple of weeks and send it back. Then you'll know if you want one or go another route.
 
Quote:
"I am not unhappy with the trigger in the G48 honestly. As far as Glocks go it’s pretty good actually. I’ve had much worse. I put an Apex kit in an M&P 1.0 a couple of years ago and it was great, so I just want to be sure I’m not missing anything in the striker fire world."

I have fondled a few G48's and agree that their trigger is pretty nice. If I get one, I may just give it a Ghost Edge connector and call it good.
 
The fit is exactly like it should be, and retention is adjustable as requested.
 
  • Like
Reactions: RR
@fieldgrade , if you want to try a Zev trigger before you buy, I can pull mine out and send it to you. Try it a couple of weeks and send it back. Then you'll know if you want one or go another route.
I appreciate that offer.
 
Does that mean you want to try it? If so, PM me your address and I'll get it in the mail.
I shot a Zev gun last week, and I’m not sure their trigger is the way I want to go. I am assuming they would be similar. I’ve about decided to roll with the stock trigger in it for now.

But thanks again for that offer.
 
Last edited:
I shot a Zev gun last week, and I’m not sure their trigger is the way I want to go. I am assuming they would be similar. I’ve about decided to roll with the stock trigger in it for now.

But thanks again for that offer.
You're welcome, let me know if you change your mind. Some polishing in the right places and a drop in Ghost connector neaten things pretty good.
 
Back
Top Bottom