Which gen3 glock trigger

  • Thread starter Zedhound
  • Start date
  • Replies 7
  • Views 592
Z

Zedhound

Guest
im building a g19 from a poly 80 frame. I have 2 glocks but haven't done anything to their triggers so I don't have xp with any after market drop ins. I'm looking to spend around 100 or less.

What do people recommend?

I prefer little creep and a short reset.
Like a single stage ar triggers.
 
My buddy put a Zev trigger and bar in his G19. I put an Apex trigger and bar in my G17. I feel like we both wasted money. The trigger is a little wider and I like that but the trigger pull is still Glock.
 
Be careful with your Polymer 80 build because they work best with OEM parts. Good luck and post some pics! I'm planning to do another build with a G23.
 
My buddy put a Zev trigger and bar in his G19. I put an Apex trigger and bar in my G17. I feel like we both wasted money. The trigger is a little wider and I like that but the trigger pull is still Glock.
Thanks I was look at the apex aet.

I don't mind the oem but want a slightly less wall and shorter reset
 
I have the full Zev Fulcrum in my P940C and it works wonderfully. Very little uptake, zero over travel and it breaks like a glass rod at 3ish pounds. They are fairly spendy, but if you do the entire kit, they work 100%. Where people run into issues is only using the aftermarket trigger bar, or replacing parts piecemeal with some aftermarket and some factory Glock. The trigger doesn't really change all that much unless you replace ALL the trigger parts and the mixture causes malfunctions.
 
Last edited:
Ghost edge kit in every glock I own. 30 bucks for the bar and all springs. All drop in. Stay away from any that you have to modify for reset. Ghost has those as well and IMO they feel spongy on take up and reset.

Best part is they are only 30 bucks so if you don't like it your not out a lot of money.

Sent from my SM-G930P using Tapatalk
 
I have an apex in my G19. Really like it.
 
If you prefer a little creep & a short reset why not just go with the OEM trigger with a Minus Connector? The OEM Trigger w/ Trigger Bar can be had for around $15 + $5 for the Trigger Spring + $10 for the Trigger Housing & around $18 for the Minus Connector. That's $50 versus a Vanek, Zev or Glocktriggers.com coming in at around $150 to $250. Apex has a nice one in your price range ($130ish), but it's still running the OEM Trigger Housing (that's not included).

You should also check out the TTI Grand Master Connector Kit. Just throw it in an OEM Assembly & you're GTG! http://tarantacticalinnovations.com/tti-grand-master-3-25lb-connector-kit/

If you're deadset on an aftermarket trigger be prepared to spend at least $150 because there's not many quality manufacturer's out there that charge less. Funny thing is, most of them use Glock OEM parts & just modify & polish them.

EDIT: I just saw your post that said you don't like the Wall on an OEM trigger. Get a ZEV V4 Race Connector & use an OEM Trigger Assembly. The ZEV Connector gets rid of the wall & lowers the pull substantially. Short reset too.

One more thing... if you decide to use an Extra Power Trigger Spring, test it before you fire the weapon. Most of them won't let your trigger safety fully engage during reset & that can be dangerous.
 
Last edited:
Back
Top Bottom