PS90 and FS2000 3D printed trigger pack teaser (similar to NYLAUG design)

I need to know when the PS90 version is available. 😎
 
www.titantacticaldesigns.com

P90/PS90 Side MLOK Rails (2 Rails)

Now you can mount your favorite M-LOK accessories like weapons lights and sling mounts to your PS90/P90. We sell our rails as a set which includes...
www.titantacticaldesigns.com www.titantacticaldesigns.com
mlock side rails for ps90. that's kind of cool
 
Thatonedude said:
I like the Haga front end myself…
Click to expand...
Well somebody had to, or else they wouldn't be in business...
probably a decent add on for a non-sbr. I appreciate they made a version for sbrs too... but i think i won't be getting one
 
Any timeframe updates for the PS90?
 
BigWaylon said:
Any timeframe updates for the PS90?
Click to expand...

No timelines. I think the most recent printed iteration had an issue with the hammer being a little too high up. The iteration I tested does function. It's just annoying to remove. He's lowered it in the files but we need to print it and test it still.

1706832328236.png
 
some_kid6 said:
No timelines. I think the most recent printed iteration had an issue with the hammer being a little too high up. The iteration I tested does function. It's just annoying to remove. He's lowered it in the files but we need to print it and test it still.

View attachment 736234
Click to expand...
Cool.

Well, you know where another tester is if you need one. 😎
 
Here's a link to the files for the outside shell. The insert is still a WIP.

www.thingiverse.com

PS90 Trigger Pack Housing by some_kid6

This is a recreation of the trigger pack for the PS90 made by Themoosegoesmoo. You can get the spring for the takedown lever in an assorted spring kit like this one. The no hook model is easier to print and omits the hook shaped protrusion from the bottom of the pack. It isn't required for...
www.thingiverse.com www.thingiverse.com
 
some_kid6 said:
Here's a link to the files for the outside shell. The insert is still a WIP.

www.thingiverse.com

PS90 Trigger Pack Housing by some_kid6

This is a recreation of the trigger pack for the PS90 made by Themoosegoesmoo. You can get the spring for the takedown lever in an assorted spring kit like this one. The no hook model is easier to print and omits the hook shaped protrusion from the bottom of the pack. It isn't required for...
www.thingiverse.com www.thingiverse.com
Click to expand...
The no hook model is easier to print and omits the hook shaped protrusion from the bottom of the pack. It isn't required for function and removing it makes printing way easier.

What is the hook for?

You can get the spring for the takedown lever in an assorted spring kit like this one.

What is the takedown lever? I haven’t pulled my trigger pack out in awhile and it’s not ringing a bell. Does the factory one also have the lever? Is something needed other than the print above and a spring in order to get the takedown lever to work?
 
BigWaylon said:
The no hook model is easier to print and omits the hook shaped protrusion from the bottom of the pack. It isn't required for function and removing it makes printing way easier.

What is the hook for?

You can get the spring for the takedown lever in an assorted spring kit like this one.

What is the takedown lever? I haven’t pulled my trigger pack out in awhile and it’s not ringing a bell. Does the factory one also have the lever? Is something needed other than the print above and a spring in order to get the takedown lever to work?
Click to expand...

It seems to be extra insurance for keeping the pack in place but there's also plenty of shelves that do that already so I'm not entirely sure. I don't have the trigger pack to figure it out at the moment. The takedown lever is the little lever at the back of the pack that keeps it from sliding out. Here's some pics of the lever



1712594778913.png
 
some_kid6 said:
It seems to be extra insurance for keeping the pack in place but there's also plenty of shelves that do that already so I'm not entirely sure. I don't have the trigger pack to figure it out at the moment. The takedown lever is the little lever at the back of the pack that keeps it from sliding out. Here's some pics of the lever



View attachment 765851
Click to expand...

Gotcha.

So we’d need one of the two housings printed, plus the takedown lever and locking pin. And a spring.

Plus the internal assembly whenever it’s ready.

At that point, we just need a complete AR FCG including pins…and we’re in business?
 
BigWaylon said:
Gotcha.

So we’d need one of the two housings printed, plus the takedown lever and locking pin. And a spring.

Plus the internal assembly whenever it’s ready.

At that point, we just need a complete AR FCG including pins…and we’re in business?
Click to expand...

Sounds right. It's being tested with this anderson fcg currently. It worked really well with the NYLAUG project one

Here's the shell printed in PC

1712851986815.png
 
Last edited:
BigWaylon said:
Cool.

If anybody here wants to volunteer to print this for me, send me a PM. 😎
Click to expand...

PM'd. It still needs the OOB safety situation figured out and to confirm the hammer height is correct. Gotta print it in the correct materials as well.
 
this may be a question for somebody that is an 07 ffl, but will those things take any extra parts in them?
 
DrScaryGuy said:
this may be a question for somebody that is an 07 ffl, but will those things take any extra parts in them?
Click to expand...

The AR15 insert won't be able to operate in fully semi automatic. The shell is the same as the commercial one though so it would take the same modifications to make it FSA.
 
The original OOB safety has been recreated. One step of many to figure out how to make it work with the AR15 trigger

1713713559619.png
 
You must log in or register to reply here.
Back
Top Bottom