9mm 115g 124g Your Recipes Please

[Smack]

Can I get a few of your favorite recipes for 9mm in 115g and 124g, I will be using them mostly in a 1911 5 inch


All I have on hand for powder is

Titegroup
Bullseye
CFE Pistol
W231
HP38
HS6
Longshot

Thanks !

 

[wvsig]

4.3gr W231/HP38 under 124 FMJ 1.14 OAL runs in every 9mm gun I have.

 

[mred20]

For 115g round nose.....5.0gr CFE Pistol at OAL 1.13

 

[IkeStarnes]

124g xtreme flat nose, 3.4g CleanShot, 1.06". Makes 139 power factor out of my 16" PCC.
125g blue bullet roun nise, 3.2g CleanShot 1.09". Makes 135 power factor out of my 16" PCC.

Edit. TiteGroup is similar but you will need less.

 

[Beef15]

I load 125gr Blues @ 1.1" over 3.8gr of Cleanshot. Hits 1050fps from a G17. Previous experience tells me TG or BE would be right there at 3.6/7.

Seems like I had a pretty accurate 4.2gr BE under a Ranier 115.

 

[Tarowah]

124gr I run 5.2gr of CFE Pistol or 5gr of Unique, both with OAL of 1.15.

 

[Catfish]

My pet load: 124 gn coated RN over 4.6gn Unique @1.125" runs ~1100fps from a Glock 19.

I run these in a 5" 1911 style (dbl stk RIA) with good precision and no sonic crack but i have not chronographed them.

ETA this load also gets used in a Shield, CZ SP01Tac, Sig M11a1, and an antique P-08 Luger with good results.

 

[Charlie]

124 grain FMJ with 5.0 grains of BE 86.

 

[Toprudder]

124 grain FMJ with 5.0 grains of BE 86.

BE86 is one of my favorites.

For 9mm I like RMR plated bullets, either 115 or 124gn, RN. For my 9mm AR carbine, my pet load is RMR FMJ RN 115 (the ones they make in-house) with 6.1gn Power Pistol.

 

[TCAM]

124gr RMR matchwinner with 4.4gr of hp38, 1.13 OAL

Here is a ton of different loads i just saw the other day. http://www.natoreloading.com/9mm/