Wenatchee Kid
Well-Known Member
I have the Dillon 550 with Dillon dies, except for the crimp, which is a Lee Factory Crimp die. The problem I'm having is getting the rounds to go into the chamber gauge/barrel correctly. Here are the specs I'm dealing with: 115 RN Blue Bullet over 5.7 grains of HS6 with a 1.165 OAL, .375 case neck, and .385 right above the case head.
I would appreciate any and all suggestions. I am attaching a picture of a round I just reloaded.
I would appreciate any and all suggestions. I am attaching a picture of a round I just reloaded.