What lube do you all use for suppressor boosters, and does anyone have experience with trying rustoleum or krylon as a tube finish on titanium? I assume it wouldn't work because of the heat, but wondered if anyone has tried it?
Thanks!
The advantage of using high temp spray is you can touch them up at any time. I did one with flat primer gray:
I’m about to do a barrel with this:
I did six cans a couple years ago with the air cure cerakote:
And if you don’t want to fool with it, we have a member here that will do them for $25 apiece. I redid all six of those above, plus some more recently, and had him coat them this time.