HUB vs. ASR

[Tim]

Put this in the 'Tim is crazy busy and his brain is full category'....are my SiCo Bravo ASR (Omega 300) can interchangeable with HUB systems?

My impression is that SiCo thread pattern is what the HUB was...ummm...patterned after?

 

[BigWaylon]

Yes. The HUB system is what was initially called the Omega thread pitch…if that’s what your asking?

 

[Squanchy]

Yeah it's all the same 1.375-24

Dead air, sico, YHM, I think q has a mount also? Idk


Edit looks like I was beat to the punch 🤣

 

[Supermatch]

HUB is 1 3/8 x 24 as the standard. Bravo ASR is fine. The Charlie mounts won't work, because those are the ones for the externally threaded cans like the Velos, Saker, and 36M.

 

[Tim]

Thanks.

I'm a little bit perturbed because the KGM can I picked up a couple weeks ago has a proprietary mount. I was planning on switching everything over to one of the 'better' options.

 

[Squanchy]

Thanks.

I'm a little bit perturbed because the KGM can I picked up a couple weeks ago has a proprietary mount. I was planning on switching everything over to one of the 'better' options.

Which can is it?

Also kgm is the manufacturer for dead air... So beat the crap out of it before trusting it for serious use. Make sure you didn't end up with a lemon. If it isn't already covered in mud and changed color from whatever wildness you end up in

 

[Supermatch]

Thanks.

I'm a little bit perturbed because the KGM can I picked up a couple weeks ago has a proprietary mount. I was planning on switching everything over to one of the 'better' options.

All my SiCo stuff got tossed in the parts bin, and I use the Griffin Plan A mounts for everything now. No springs, no locking doohickies, just a low profile taper mount for the can, and their EZ Brake for muzzle devices on everything to act as a sacrificial baffle.