Jmoser
Well-Known Member
I’ve shimmed plenty of revolvers but have one that may need it the most - as you can see not every S&W is a work of machining art.
Despite all the polishing I’ve done the trigger wants to tip and rub in DA - interesting it runs fine if I use left hand with opposite torque on the left edge of the trigger blade. Right side it almost jams completely.
Ordered a master assortment of shims - will not get to it until next week after travel.
Despite all the polishing I’ve done the trigger wants to tip and rub in DA - interesting it runs fine if I use left hand with opposite torque on the left edge of the trigger blade. Right side it almost jams completely.
Ordered a master assortment of shims - will not get to it until next week after travel.
Last edited: