Show Off Your Competition Gun

FlatFender

FlatFender

Well-Known Member
Joined
Dec 17, 2016
Messages
1,108
Location
Raleighish
Rating - 100%
8   0   0
Post a pic, and let us know what game/division you shoot with it. Maybe even any modifications you've done, etc.

(Ex. Glock 34, Dawson Sights, shot in IDPA SSP and USPSA Production)

​​​​​
 
S&W Shield 9 for IDPA. Has Apex duty kit installed...that's Springs and the sear. Trigger breaks at 5lbs. Also has Dawson Red fiber front/black rear.

2nd picture is my IDPA gamer gun for CCP. A Glock 26. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.

3rd pic is my new IDPA CCP/Bug gun...a Honor Defense Honor Guard...totally stock configuration. 7.5lb trigger.

4th pic is my USPSA Production Glock 34. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull. Has 30,000 rounds thru it and countless hours of dryfire.

Last pic has my G34 at the top...a G17...my USPSA backup gun, then my G19 backup backup gun for USPSA and idpa. All my Glocks have Dawson red fiber opticsights front/black rear sights/ Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.
 
Last edited by a moderator:
My new uspsa production gun, was shooting a glock 34, decided to upgrade to a steel gun.
tanfoglio stock 2
Dawson fiber up front
Henning guide rod and firing pin
​​​changed almost all the springs
polished all internals
henning base pads
Gotta get some different grip panels.

Only about 600 rounds through her the past two weeks, still a match virgin, shoots like a dream.
 
This is my main handgun. 9mm CZ75B. Nothing special, but it is so much better than I am. Shoots right where you point it. Don't know how many rounds it has thru it but it is north of 30G.

It has:

-Been converted to SA (and DA disco removed)
-Removed FPB
-CajunGunWorks: Race Hammer, Billet adj sear, SA trigger, Custom extended mag release, trigger return spring and pin (not in photo), Trigger around 3lbs with very short reset.
-SS guide rod
-Dawson fixed sights
-Shadow safety
-LOK grips

I've shot this in IDPA ESP(don't tell on me bro), 3gun, 2gun, ZSA, and misc. other matches. Never let me down.


 

Attachments

  • IMG_4660.JPG
    IMG_4660.JPG
    173.2 KB · Views: 13
slow is slow said:
My new uspsa production gun, was shooting a glock 34, decided to upgrade to a steel gun.
tanfoglio stock 2
Dawson fiber up front
Henning guide rod and firing pin
​​​changed almost all the springs
polished all internals
henning base pads
Gotta get some different grip panels.

Only about 600 rounds through her the past two weeks, still a match virgin, shoots like a dream.
Click to expand...
NIce! I guess Ben B went to one of these as well.

This may be my next gun. Either that or the Limited Elite, not sure if I wanna do production or limited yet.
 
New USPSA Limited piece, I had to round off the mag release a bit and it needs some grip tape. Only about 150 rounds through it so far. Tuesday will be the first running in a match


 
Butter said:
New USPSA Limited piece, I had to round off the mag release a bit and it needs some grip tape. Only about 150 rounds through it so far. Tuesday will be the first running in a match


Click to expand...
So badass.
 
Starkherz199 said:
S&W Shield 9 for IDPA. Has Apex duty kit installed...that's Springs and the sear. Trigger breaks at 5lbs. Also has Dawson Red fiber front/black rear.

2nd picture is my IDPA gamer gun for CCP. A Glock 26. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.

3rd pic is my new IDPA CCP/Bug gun...a Honor Defense Honor Guard...totally stock configuration. 7.5lb trigger.

4th pic is my USPSA Production Glock 34. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull. Has 30,000 rounds thru it and countless hours of dryfire.

Last pic has my G34 at the top...a G17...my USPSA backup gun, then my G19 backup backup gun for USPSA and idpa. All my Glocks have Dawson red fiber opticsights front/black rear sights/ Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.
Click to expand...
Love the G26...nice.
 
No pics, but either

- Glock 26 w/ TFOs and cerakote or
- Beretta 92 police trade in, only mod is replacement of a worn out recoil spring
 
My Brazos tuned STI Edge .40

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/scontent-atl3-1.xx.fbcdn.net\/v\/l\/t1.0-0\/q81\/p526x296\/14947928_10211588433972864_3487971587250886871_n.jpg?oh=6ca1023f2a768cbc4708859f1def59cd&oe=58DE037B"}[/IMG2]
 
Last edited by a moderator:
Matty's Brazos tuned STI Edge .40

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/scontent-atl3-1.xx.fbcdn.net\/v\/t1.0-9\/14947451_10211588773901362_3797009579636548842_n.jpg?oh=30477640a7bb61c82bdd71463fa474e8&oe=58FB60DE"}[/IMG2]
 
Last edited by a moderator:
Butter;n20797 said:
New USPSA Limited piece, I had to round off the mag release a bit and it needs some grip tape. Only about 150 rounds through it so far. Tuesday will be the first running in a match


Click to expand...

You need some scale grips
 
Wolffy;n21037 said:
You need some scale grips
Click to expand...

Yea Ive been thing of calling NC about them. Have you seen him on here?
 
Butter;n21055 said:
Yea Ive been thing of calling NC about them. Have you seen him on here?
Click to expand...

have not seen the cudaman. I was going to hit him up at next match.

You need the 2.0 scale grip. Those things are super sexy
 
2.0s on the left. Hope you can see the tits on them lol
 
Last edited by a moderator:
Skeeter190;n21235 said:
2.0s on the left. Hope you can see the tits on them lol
Click to expand...

These pics are not doing the grips justice. Need to see them in person.
 
Starkherz199 said:
S&W Shield 9 for IDPA. Has Apex duty kit installed...that's Springs and the sear. Trigger breaks at 5lbs. Also has Dawson Red fiber front/black rear.

2nd picture is my IDPA gamer gun for CCP. A Glock 26. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.

3rd pic is my new IDPA CCP/Bug gun...a Honor Defense Honor Guard...totally stock configuration. 7.5lb trigger.

4th pic is my USPSA Production Glock 34. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull. Has 30,000 rounds thru it and countless hours of dryfire.

Last pic has my G34 at the top...a G17...my USPSA backup gun, then my G19 backup backup gun for USPSA and idpa. All my Glocks have Dawson red fiber opticsights front/black rear sights/ Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.
Click to expand...
Great collage if you get that Shield out of there ;-P
 
Starkherz199 said:
S&W Shield 9 for IDPA. Has Apex duty kit installed...that's Springs and the sear. Trigger breaks at 5lbs. Also has Dawson Red fiber front/black rear.

2nd picture is my IDPA gamer gun for CCP. A Glock 26. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.

3rd pic is my new IDPA CCP/Bug gun...a Honor Defense Honor Guard...totally stock configuration. 7.5lb trigger.

4th pic is my USPSA Production Glock 34. Has Dawson red fiber opticsights front/black rear sights. Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull. Has 30,000 rounds thru it and countless hours of dryfire.

Last pic has my G34 at the top...a G17...my USPSA backup gun, then my G19 backup backup gun for USPSA and idpa. All my Glocks have Dawson red fiber opticsights front/black rear sights/ Has the Ghost Evo Elite connector, 6lb striker spring, and extra power trigger spring for a 5lb trigger pull.
Click to expand...
You're awesome Phil
 
Tyederian;n21498 said:
I hope to have a picture of a shadow 2 eventually.
Click to expand...

Tye you understand a competition gun is meant to be shot at competitions right?
 
The road to hell is paved with good intentions. Tuesday Tye, just sayin.....
 
toddje said:
Well, this is my old standby - G19 with dawsons. It runs SSP and/or Production if I ever get to matches... There's a G17 around here somewhere just like it. Stock internals.
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i564.photobucket.com\/albums\/ss89\/toddje919\/B0EA1FA1-1E52-4C36-B1C1-ED12302E3FCE_zpsqic6ucxc.jpg"}[/IMG2]




But I'm thinking of running this guy...
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i564.photobucket.com\/albums\/ss89\/toddje919\/E04654E8-46BB-4BA5-B5D2-526F983BD84F_zpsj0kc1lgl.jpg"}[/IMG2]
Click to expand...
I thought you tried 1911s ages ago and went back to Glocks?
1911s (or 2011s) is where it's at!
 
You must log in or register to reply here.
Back
Top Bottom