Yes, and that is actually the only piece of blue equipment that i have: the super swagerDillon
So....I'm there. Ran into some military crimps on 223 brass. Have the Lee little handheld thing but man, that's a lot of work.
What process/tool do you use to make your life easier?
So....I'm there. Ran into some military crimps on 223 brass. Have the Lee little handheld thing but man, that's a lot of work.
What process/tool do you use to make your life easier?
I didn't know Dillon made a press-mounted swager, except on the 1050 and CP2000. Do they have one for the 650?I have both the RCBS primer pocket, bench mounted swaging tool and the press mounted Dillon swager. The Dillon press mounted tool didn't swage enough so I just re-swaged 1000 cases with the rcbs bench swager. Primers go in great. I hate to give up on the Dillon because I can feed them with the case feeder and decap and swage fast with an extra toolhead on the 650. Hope to get it figured out.
Yes,I didn't know Dillon made a press-mounted swager, except on the 1050 and CP2000. Do they have one for the 650?
Look up Dillon 650 swage it and you should find it. You screw out your primer ram underneath and the swager attaches to the press by removing a small part that is on the press frame. If I can get it to swage correctly, it would be nice because I can run them through the case feeder and use a toolhead to universal decap. The at the priming stage (2nd stage) it swaged like you are priming. I had to swage my pockets again but I may be doing something wrong. I am going to play with it a little more.I didn't know Dillon made a press-mounted swager, except on the 1050 and CP2000. Do they have one for the 650?
Ok, that I know about. It is NOT made by Dillon, and I've heard that if you use that, it voids the warranty on the press.
Gotcha, it came with my setup used. It doesn't work good anyway lol.Ok, that I know about. It is NOT made by Dillon, and I've heard that if you use that, it voids the warranty on the press.
https://www.dillonprecision.com/xl-650-swager-warranty-voided_350_11_3064.htm