For those that roll Tanfoglio...
I have a large frame Tanfoglio Stock II in 9mm. I previously had installed a Henning firing pin, along with a Wolff 10# recoil spring and 13# hammer spring. I've dry-fired the gun a bunch, but probably only shot around 1000 rounds through it. The trigger pull (average of 5 on a Lyman digital) was DA- 8lb 10oz, SA 3lb 1 oz.
Today I installed a Titan Hammer, Patriot Defense Bolo Interrupter and a Patriot Defense 12# Hammer Spring. I'm happy with the new trigger. DA is now 6lb 5 oz, SA is about the same at 3lb 3oz and the reset/take up after the first shot is really good. The problem is the safety no longer engages. What should I be looking for. I'd really like to keep the parts I have in there, as I prefer the feel of the trigger now, but for majors it's possible the Chrono guy will check to see if the safety engages.
The safety lever will no longer move up, regardless of whether the hammer is cocked or not, while previously it would engage either way. Thanks for any help.
I have a large frame Tanfoglio Stock II in 9mm. I previously had installed a Henning firing pin, along with a Wolff 10# recoil spring and 13# hammer spring. I've dry-fired the gun a bunch, but probably only shot around 1000 rounds through it. The trigger pull (average of 5 on a Lyman digital) was DA- 8lb 10oz, SA 3lb 1 oz.
Today I installed a Titan Hammer, Patriot Defense Bolo Interrupter and a Patriot Defense 12# Hammer Spring. I'm happy with the new trigger. DA is now 6lb 5 oz, SA is about the same at 3lb 3oz and the reset/take up after the first shot is really good. The problem is the safety no longer engages. What should I be looking for. I'd really like to keep the parts I have in there, as I prefer the feel of the trigger now, but for majors it's possible the Chrono guy will check to see if the safety engages.
The safety lever will no longer move up, regardless of whether the hammer is cocked or not, while previously it would engage either way. Thanks for any help.
