What all can you do?

MadMan4Ever

MadMan4Ever

Sig-Sauer devotee
Joined
Dec 24, 2016
Messages
487
Location
Walnut Cove, NC
Rating - 100%
1   0   0
I want a sun shield for my car with "GRNC.org" in eye catching font, along with "Fighting for NC gun rights for over 20 years" in smaller font.

I could also go for "the NRA is for federal cases, we are for NC." Something to explain what we do better.
 
He's a talented guy. He keeps surprising us with the things he comes up with. I'm curious to see if he can do this also.
 
GRNC windshield banner v1.jpg I am sorry for the delay, I didn't get a notification of this post so I didn't see it.

I can do a windshield banner with no problem. The issue you will have is that windshields have a slight bow to it and I have no way of matching that curve on the windshield because each brand/model is different. I can do it but it will be perfectly straight across. Font choices are tricky, what one person likes and thinks looks good doesn't to someone else. Check out www.dafont.com and see what fonts you like.

Here is just a quick mock up sized 22" wide
 
Last edited:
DesignMine said:
I can do a windshield banner with no problem. The issue you will have is that windshields have a slight bow to it and I have no way of matching that curve on the windshield because each brand/model is different. I can do it but it will be perfectly straight across.
Click to expand...
(I don't see a mockup? fixed)

If I read the OP correctly, he wants a sunshield...not a banner. Something to prop up in his windshield when parked with the "ad" showing.

Not sure if you can print on an available sunshade, or make a decal that he could apply.

This is what I had in my mind, since it's similar to the one I have (mine has a Ram logo):

image.jpeg
 
DesignMine said:
THAT makes a lot more sense. I don't have a way to print those unfortunately. I could make one with cut vinyl but I am afraid that it wouldn't last long being folded over and over.
Click to expand...
But you could make a vinyl cutout that he could apply, right? Similar to what you'd sell somebody to apply to a rear truck window? All the wording would line up, he'd apply to a shade and peel the backing off?

I think there's a better chance of it sticking to the nicer accordion style shades than the roll-up foil kind.
 
BigWaylon said:
But you could make a vinyl cutout that he could apply, right? Similar to what you'd sell somebody to apply to a rear truck window? All the wording would line up, he'd apply to a shade and peel the backing off?

I think there's a better chance of it sticking to the nicer accordion style shades than the roll-up foil kind.
Click to expand...
Yes, I could do that, I just am not sure how well it will hold up over time of being folded/unfolded. BUT yes, I can
 
Could probably like the letters up (assuming a large enough font) with them all on the flat sections and not the folds.

(I know it's not my thread...but it gives me ideas of having one made for something else)
 
BigWaylon said:
Could probably like the letters up (assuming a large enough font) with them all on the flat sections and not the folds.

(I know it's not my thread...but it gives me ideas of having one made for something else)
Click to expand...

I appreciate your commenting, I wasn't following what the OP was asking. I just checked with one of my sources and I can get them printed but it would be a minimum of 100 of them (still don't know the price but I am guessing $15-20 per)
 
I can't afford a hundred, but I am curious if the organization would like to sell something like this... maybe they could do it and I buy one from them.. I will run it up the flag pole and see...
 
You must log in or register to reply here.
Back
Top Bottom