Trying to help @LizardKing with a project, Cub Cadet HDS 2165 WITH A 2 cyl. Briggs & Stratton engine ( engine model # 303447 ). Seems the charging system is not working.
Checking voltage at the battery terminals, no change as the rpms increase.
The yellow two wire connector should be the wiring coming from the stator to the regulator ( reluctor ? ). Checked the AC voltage coming out of the connector, got 4 volts.
The single red wire that is disconnected should be the wire coming from the regulator to the battery, got zero volts.
Best we can determine is the stator is bad. I'd be happy if someone would tell me I don't know what I'm doing and the solution is something simple.
Any ideas?
.
Checking voltage at the battery terminals, no change as the rpms increase.
The yellow two wire connector should be the wiring coming from the stator to the regulator ( reluctor ? ). Checked the AC voltage coming out of the connector, got 4 volts.
The single red wire that is disconnected should be the wire coming from the regulator to the battery, got zero volts.
Best we can determine is the stator is bad. I'd be happy if someone would tell me I don't know what I'm doing and the solution is something simple.
Any ideas?
.