I have some on order but after watching this video, might be better to make your own.
I've been tempted by this because most plates I find would look like a postage stamp on me.....
I have some on order but after watching this video, might be better to make your own.
I’m glad you mentioned this. I have been telling people this for years. I mean just look at the poles or ground when you shoot steel. Sure you didn’t take one thru the heart but now your face looks like Freddie Kruger and you have lead in your eyes.AR500 armor is type of plate armor that is made out steel.
AR500armor.com is a retail site that has several types of armor branded in their name. You'll see people talking about "AR500 Armor Plates" and they may not be talking about steel plates.
Are you wanting info on steel plates? I don't think much of them. Testing batches of steel in the ballistics lab I got to see first hand just how much spall is generated on hits. It did is so much and so often that there was pitting in the cinder block walls, concrete floor, lift cart that we secured the clay block on, and overhead HVAC ducting at the 15 meter position. Not a fan.
CHRIS
AR500 armor is type of plate armor that is made out steel.
AR500armor.com is a retail site that has several types of armor branded in their name. You'll see people talking about "AR500 Armor Plates" and they may not be talking about steel plates.
Are you wanting info on steel plates? I don't think much of them. Testing batches of steel in the ballistics lab I got to see first hand just how much spall is generated on hits. It did is so much and so often that there was pitting in the cinder block walls, concrete floor, lift cart that we secured the clay block on, and overhead HVAC ducting at the 15 meter position. Not a fan.
CHRIS
I haven't been following the market recently. I'm sure prices are up. The lowest cost options when I was doing it were level 4 alumina oxide based ceramic plates in the 7-8 pound range. Heavy, thicker, but not expensive.Thanks Chris! What do you recommend in the $300 range?
Sent from my iPhone using Tapatalk
I haven't been following the market recently. I'm sure prices are up. The lowest cost options when I was doing it were level 4 alumina oxide based ceramic plates in the 7-8 pound range. Heavy, thicker, but not expensive.
Many people own steel plates and have had zero issues with storing them in the closet along with their skateboard helmets. Peace of mind is peace of mind.
CHRIS
Limited coverage area but deep concealment is kind of possible. Diamondback Tactical did something similar with the 5.11 Holster shirt and my NIJ listed Level II armor. Quantico HRT guys loved it for their plain clothes assignments.https://premierbodyarmor.com/products/tru-spec-concealed-armor-shirt-custom-armor-panels-bundle
Whatcha guys think of this then?
Thanks Chris! What do you recommend in the $300 range?
Sent from my iPhone using Tapatalk
Vest with front and back plates.What all do you have on it?
I have some on order but after watching this video, might be better to make your own.
Do folks point and laugh when y'all carry that grocery list through the store?
I haven’t been there to read.@CHRIS_WNC I gotta ask, any thoughts on how reliable are the folks over at reddit's /qualitytacticalgear when talking about armor? I made the mistake of going down that rabbit hole once... or twice...
I have some on order but after watching this video, might be better to make your own.
Laughs in .30-06 M2 [emoji1787]Steel is cheap, heavy, durable (can take multiple hits and keep going), and protects to around level 3+. Spalling is a concern, so they make coatings that mitigate spall. Get a good carrier that will distribute the weight. A cheap carrier and steel plates will be very uncomfortable after about an hour of walking around. Steels main issues are it doesn't go up to highest level of protection, spalling and is heavy.
I've seen these and tests on these. I wouldnt hesitate to wear them in a good carrier like Cryo or Agilite or Shell back. Getting the carrier fitting well is half the battle...i sure do love my Agilite K5Check out the Battle Steel plates on Botach. They aren’t certified (to reduce costs) but are tested to the same standards.
Sent from my iPhone using Tapatalk