Need a cursed SCIFI AR pistol grip.

God it's just so awful, do they make one that isn't featureless? Hell a Dremel could fix that though. I love it.
 
Squanchy said:
God it's just so awful, do they make one that isn't featureless? Hell a Dremel could fix that though. I love it.
Click to expand...
It's not considered featureless, it's just a weird shape giant stock w a built in pistol grip. Someone was snorting Halo Covenant weapon designs and I adore it.
 
It needs a 16" with a cookie cutter brake, hera stock set, g36 carry handle, hand stop of some kind, a liquid filled sling... And some purple needle like crystals sticking out the back that are consumed as you dump the mag 😇
 
Last edited:
Squanchy said:
My bad it looked like it had a big thing of plastic in the middle. Just awful Photoshop.

Dang, another thing to add to the spray paint this bucket. It needs to should be purple with blue lights 😂
Click to expand...
I do have metallic purple paint on hand, but it's getting built because the weather is too flaky to use it lol. Or I'd be building the GayR.

Looking closer I actually used a pic of their featureless one, didn't notice with the dark background lol. They make it without the Commiefornia Virginity Protection Plates.
 
Last edited:
I do love some metallic purple paint! I have some mags I've been meaning to flash up myself.

I'm just so happy me telling @PurpleWalrus to get his crap out of my house has spawned this build.
 
herr_cobblermachen said:
It needs a 16" with a cookie cutter brake, hera stock set, g36 carry handle, hand stop of some kind, a liquid filled sling... And some purple needle like crystals sticking out the back that are consumed as you dump the mag 😇
Click to expand...
What it really needs is an ultrashort 37mm launcher in front of that Hera grip. For dildos and such.
 
Yeah this may be necessary in the future, unless someone feels like buying me a late Valentines gift......

Screenshot_20230215-104426.png

I need an excuse to make some 37mm dildo launching rounds and that would be it. With those flashing lights inside like you get with those clear plastic bouncy balls.
 
Last edited:
NCLivingBrit said:
Yeah this may be necessary in the future, unless someone feels like buying me a late Valentines gift......

View attachment 585199

I need an excuse to make some 37mm dildo launching rounds and that would be it. With those flashing lights inside like you get with those clear plastic bouncy balls.
Click to expand...
The feds watching this sight rn like

giphy.gif
 
NCLivingBrit said:
If they were priced like they used to be I'd already be ordering it. Alas they are not.
Click to expand...
Pink cherry just had 30% off their entire website. Some crap was up to 80% off. Heck I might have an extra one you can have.


Oh, wait do you mean the launcher?
 
herr_cobblermachen said:
The F2000 g1 grenade launcher is the way to go, but man the airsoft versions cost as much as much as the ole m203 tube used to
Click to expand...
Yeah after I googled that, I haz a sad. Because you're right, it would be perfect.

In other news I got the new carry handle optic. Damn ad said 20mm rail.... And it is. On top. The rail to go on the gun is bloody 11mm. Adapters on the way, it needed a teensy height boost so may this will be better.

Optic is shockingly clear and crisp for airsoft junk.
 
There's a beretta grenade launcher for the arx rifle.
I kind of want to see if a top carry rail works on the beretta rifle.It looks naked with just the flat top
 
It's airsoft, but it would definitely have the look.....

Screenshot_20230216-203114-465.png
 
  • Like
Reactions: Me.
Me. said:
That one in the pic does have a “featureless“ plastic instert.

But the company makes ones without the insert.


I rather like it. I think the reduced surface area on the shoulder is a cool look. I’m considering hacking mine up, now that I’ve seen that stock.

View attachment 585811
Click to expand...
It's neat looking, wondering how comfortable it'll be to shoot.

Want to be our test subject? 😂
 
Me. said:
That one in the pic does have a “featureless“ plastic instert.

But the company makes ones without the insert.


I rather like it. I think the reduced surface area on the shoulder is a cool look. I’m considering hacking mine up, now that I’ve seen that stock.

View attachment 585811
Click to expand...
www.strikeindustries.com

MOD1 Stock

Strike Industries drop-in replacement buttstock for AR/15/M16 carbine using mil-spec sized receiver extension tubes. The MOD1 stock integrates features sought by military professionals and firearms enthusiasts around the world. Strike Industries came up with a lighter, compact buttstock, at an...
www.strikeindustries.com www.strikeindustries.com
 
  • Like
Reactions: Me.
"So Brit you bumbling madman, how are you going to mount your silly 11mm airsoft scope on an AR?"

Good question. Everyone under the sun makes an 11mm to 20mm rail converter but I was only able to find one 20mm to 11mm one. They're short and probably a bit tall, but they'll work. I'm going to replace the big knob with a flat nut because I hate when those giant things.

Screenshot_20230217-081901-037.png


But long term I'm going to hate those probably, so I have some receiver shaped 11mm rail add-ons coming. Several of them because they were cheap and I'm probably going to wreck some doing jank to them.

Screenshot_20230217-082003.png


Plan is to attach that to the lowest profile picatinny mount I can find (probably the sort of thing you use to attach an RMR or Sig Romeo Zero to a rail) and use that instead. The lump ones aren't to my taste.

If however anyone know where I can get a low rise 20mm to 11mm converter please chime in! I'd considered modifying the clamp lips of the optic but there just isn't enough material to be sound after removing enough to fit a 20mm rail.

The things I do to make silly guns.....
 
  • Like
Reactions: Me.
i dunno. i always like to cram my stocks into the shoulder pocket where stocks are meant to go. But i see all these videos of tier 1 youtube operators taking just the top of a stock on their clavicle, so i get confused.
 
  • Like
Reactions: Me.
DrScaryGuy said:
i dunno. i always like to cram my stocks into the shoulder pocket where stocks are meant to go. But i see all these videos of tier 1 youtube operators taking just the top of a stock on their clavicle, so i get confused.
Click to expand...
By tier one operators do you mean goofy youtubers with borrowed guns doing dumb stuff? Lol
 
Me. said:
Maybe on the white one (Pic edited below). Your threads make me want to do more than spray-paint.

I think the smaller surface would force putting the recoil straight back, reducing muzzle flip.

View attachment 586052
Click to expand...
that's rather dazzling

I was just in michaels today and i saw gold flake and blue flake krylon.
I will very likely do up an ar with those colors in tiger stripe some day soon. I was thinking to take my spike's unicorn 22 and just masking tape over the factory markings. Or maybe just use one of my other sets.
Or maybe a blue flake highpoint frame with gold stripes on the slide and grips. Not sure. but something has gotta happen.
 
NCLivingBrit said:
By tier one operators do you mean goofy youtubers with borrowed guns doing dumb stuff? Lol
Click to expand...
things like this

1676681402704.png
I get that her armor may be getting in the way, but daaang, that thing is like 2sq cm "shouldered" against a bit of deltoid
 
Well dammit, the G36 optic isn't apparently an 11mm dovetail either, it's some whole other thing. Which means to get it to work I'd have to make a rail entirely from scratch and attach that rail to some Picatinny mount.

Trying to decide it it's worth the hassle or if I just send it back for a full refund and buy something else. I really like the look though.
 
  • Wow
Reactions: Me.
NCLivingBrit said:
Well dammit, the G36 optic isn't apparently an 11mm dovetail either, it's some whole other thing. Which means to get it to work I'd have to make a rail entirely from scratch and attach that rail to some Picatinny mount.

Trying to decide it it's worth the hassle or if I just send it back for a full refund and buy something else. I really like the look though.
Click to expand...
Friend, we have the tools. Shoot me the measurements, and ill have an stl so fast, in the words of chuck yeager, itll make a p51 look like its flying backwards
 
herr_cobblermachen said:
Friend, we have the tools. Shoot me the measurements, and ill have an stl so fast, in the words of chuck yeager, itll make a p51 look like its flying backwards
Click to expand...
I'm already grinding down some Picatinny risers. Had to stop for a dinner break because they were a bit hotter than flesh enjoys.

But I appreciate it!
 
IMG_20230219_173612178.jpg

Snug as hell so I am going to wait to mount it until the handguard is here. Front piece is friction fit so I can adjust it for shift in slots between rail and upper. Amazingly I don't even think I broke the scope parts lol

I took off the folder hinge off the lower because it was superfluous and making the stock overly long.

Now if my damn handguard would clear customs I can assemble this thing!
 
Last edited:
Handguard finally cleared customs, just got to wait for USPS to schlep it here from City of Industry, CA. The home away from home of Chinesium shit lol
 
NCLivingBrit said:
Handguard finally cleared customs, just got to wait for USPS to schlep it here from City of Industry, CA. The home away from home of Chinesium shit lol
Click to expand...
Mos Sino Coast Port... you'll never find a more wretched hive of scum and villainy...

I know I've surely asked this already but which handguard are you waiting to get from Jinping?

Oh! The rail issues you were having. hk family has a dovetail on the top of the rifles that the carry handle slides onto then has screws go through, specifically the g36/sl8. I made a rail for mine and looking at the airsoft carry handle just jogged my memory.
Wasn't someone making an hk style carry handle for a picc rail?
 
herr_cobblermachen said:
Mos Sino Coast Port... you'll never find a more wretched hive of scum and villainy...

I know I've surely asked this already but which handguard are you waiting to get from Jinping?

Oh! The rail issues you were having. hk family has a dovetail on the top of the rifles that the carry handle slides onto then has screws go through, specifically the g36/sl8. I made a rail for mine and looking at the airsoft carry handle just jogged my memory.
Wasn't someone making an hk style carry handle for a picc rail?
Click to expand...
Whole left side of the country is scum and villainy lol

This potmetal beauty here.
Screenshot_20230221-225924-889.png
The top rail is going to be perfect for the EL wire lighting to hide in, probably going to have a little threaded in the holes on the top at the front.

Thanks for the info but my carry handle is now all Murican Picuhtinnay! Angle grinder bro!
 
Last edited:
Last edited:
why in the world put a slimline carry handle on tope of a rifle if it doesn't have have built in set of sights?
i'm so confused by all of this madness

And have you considered a magwell grip instead of a funnel?
1677138785637.png
I'm personally a big fan of the skull that looks like it has fetal alcohol syndrome

but i actually do have one of the early fab grips on an sbr. it never fit right and i never use it
 
Those are fantastic but the handgrip would get in the way lol

Forend is out for delivery finally!
 
  • Like
Reactions: Me.
They took an extra day to carry the handguard to me, but it is finally assembled and covered with doodads.

It's gloriffic. Gloriously horrific.

G36 optic, 45 degree red dot, Sig pistol flashlight, "Perst" green/IR laser. It's so beautiful.

IMG_20230224_184440684.jpg

I think the stock is too unbalanced so I ordered the Hera CQR stock to replace it. Plus I think that PDW stock finally convinced me to SBR my 4" 22lr AR pistol.

So the component that started this all is getting removed.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom